190-01754-01 Rev. 4
FAA Approved AFMS or Supplemental AFM for the Garmin G3X Touch EFIS
P a g e
|
4-5
5. Press and Hold BACK Button to return to normal PFD display.
6. Verify ACTIVE and ARMED modes on the PFD FD mode bar if using the autopilot/FD.
NOTE
The airplane will navigate in GPS mode throughout the intermediate portion of the approach
procedure. When the airplane is inbound towards the final approach course, the CDI will
automatically switch from GPS navigation to LOC navigation.
7. Verify -------------------------------------------------------------- Course pointer slews to the front course.
8. Upon reaching the LOC course Turn inbound and follow the ILS course and vertical guidance.
9. Set Missed Approach Altitude ------------------------------------ Touch the Reference Altitude display.
Enter the missed approach altitude.
10. At Decision Altitude (DA), Continue visually for a normal landing,
OR,
•
Press GO AROUND button and fly the missed approach procedure.
ILS GLIDE SLOPE INOPERATIVE
1. Load the approach into the External navigator ----------------------------------Verify external navigator
tunes the proper frequency. Select it as the active frequency.
2. Navigation Source ----------------------------------------------------- Select LOC on the external navigator
3. Approach Minimums----------------------------------------------- Set the barometric minimums alert bug:
•
On the PFD, Touch the HSI.
•
Touch the Highlight Minimums window.
•
Enter Barometric Altitude Minimums and touch ENTER
4. G3X Touch CDI source ------------------------------------------------ Touch the HSI display on the PFD.
PFD Options window opens.
5. Select the external navigator from the CDI Source window (LOC 1 or 2).
6. Press and Hold BACK Button to return to normal PFD display.
If Flying Vectors-To-Final:
7. Activate Vectors-to-Final on the external navigator, Verify CDI changes to LOC and slews to the
inbound course,
OR,
•
If using a VHF navigation receiver, Set the CDI to the desired course -------- Touch the Selected
Course window on the PFD.
•
Enter the desired LOC course, press ENTER.
