Garmin Fishfinder 80 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 50

background image

Apollo CNX80 Pilot’s Guide

35

Trigger Speed
Set the Trigger Speed for the speed where you want the Flight Time
and Distance counters to start and stop.
1. Turn the Large knob to highlight Trigger Speed.
2. Press the CRSR knob in. The Trigger Speed will now be highlighted.
3. Turn the Small knob to the desired speed and then press the CRSR

knob again or press the Menu/Enter key.

Checklist (CHK)

The Checklist function allows you to create up to eight checklists with
up to 100 lines of text in each. You can use this feature as a method to
create customized checklists for in-cockpit review.

Creating a New or Editing an Existing Checklist
1. Press FN and then the CHK key to start the Checklist function.
2. Press the NEW or EDIT key. Press the CRSR knob in and use the

Small and Large knobs to name the new list. Press Menu/Enter
when finished.

3. With the name of your new list highlighted, press the EDIT key.
4. Turn the Small knob to choose the desired checklist item. See the

following table for available checklist items. If you want to make
your own item, press the CRSR knob in and use the Small and Large
knobs to name the new item. Press Menu/Enter when finished.

5. Then, turn the Large knob to the checklist result for that item. Turn

the Small knob to choose the desired checklist result. See the fol-
lowing table for available checklist results. If you want to make your
own result, press the CRSR knob in and use the Small and Large
knobs to name the new result. Press Menu/Enter when finished.

6. Turn the Large knob to the next checklist item. Continue with the

process in the previous steps until finished with your list. Press the
LIST key or other key to leave the Checklist function.

Checklist

CNX80 Pilot Guide 560-0984-00C Draft1.book Page 35 Tuesday, September 2, 2003 10:36 AM

«
...
37
38
39
40
41
...
»

Содержание Fishfinder 80



















































Отзывы:

Нет отзывов

Похожие инструкции для Fishfinder 80

Бренд: Eagle Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды