Garmin eTrex High Sensitivity, Руководство

Страница: 9 / 23

•
This follows similar steps as the previous slide but 1
st
the
GPS must find enough satellites.
•
On the satellite page, the upper field will say “Waiting to
find satellites” if the GPS is still looking.
•
Once enough are found, the upper field will change to
“Ready to Navigate” (this could take 5-10 min depending
on location and conditions).
•
The upper field also reports accuracy. Before marking
your location, wait for accuracy to be below ~20 feet.
•
Once accuracy is acceptable, push and hold the toggle in
for ~2 seconds. Name the point and then click ‘OK’ on the
main screen to save. Unlike the previous slide, do not edit
coordinates in the location field – those coordinates
already represent your current location.
How to Add a Waypoint for your Current Location