Garmin ENDURO, Руководство пользователя

Страница: 11 / 54

7
Úszásnemek
Az úszásnem megjelenik az edzési adatok között (kizárólag medencei úszás-
nál). A szakasz napló megtekintésekor jelenik meg az úszásnem. Egyedi
adatmezőként is megjeleníthetjük az úszásnemet ( „Adatképernyők beállítá-
sa”; 32. oldal ).
FREE : szabadstílus.
BACK : hátúszás.
BREAST : mellúszás.
FLY : pillangóúszás.
MIXED : egy közön belül több, mint egy úszásnem.
DRILL
: Drill-napló használata esetén ( „Edzés a drill naplóval”; 7. oldal ).
Tippek úszó tevékenységekhez
• A medencei úszás megkezdése előtt tekintsük meg a képernyőn megjele-
nő utasításokat, melyek szabványos medence esetén a hossz kiválasztá-
sára, egyedi medence esetén a hossz megadására szolgálnak.
Amikor legközelebb elkezdünk egy medencei úszást, a készülék a meg-
adott méretet használja majd. A MENU gomb hosszanti megnyomásával,
majd a tevékenység beállítások és a Medence méret pont kiválasztásával
módosíthatjuk a medence méretét.
• Medencei úszás alatt pihenő szakasz beiktatásához nyomjuk meg a LAP
gombot.
A készülék automatikusan rögzíti a medencei úszás szakaszait és a hosz-
szokat.
• Nyílt vízi úszás esetén a LAP gombot lenyomva egy új szakaszt indítunk.
Pihenők beiktatása medencei úszásnál
Az alapértelmezett pihenő képernyő két pihenő számlálót jelenít meg. Az
utolsó teljesített szakasz ideje és távolsága is megjelenik.
NE FELEDJÜK! Pihenéskor az úszási adatok nem kerülnek rögzítésre.
1. Úszás tevékenység alatt a pihenés megkezdéséhez nyomjuk meg a LAP
gombot.
A kijelző fekete alapon fehér szövegre vált, és a pihenő képernyő jelenik
meg.
2.
A pihenő szakaszban a
DOWN
vagy
UP
gombot lenyomva tekinthetjük
meg a többi adatképernyőt (nem kötelező).
3. A LAP gombot lenyomva folytatjuk az úszást.
4. Ismételjük ezt a műveletsort további pihenő szakaszok beiktatásához.
Automatikus pihenés
Az automatikus pihenés funkció kizárólag medencei úszásnál érhető el. A
készülék automatikusan érzékeli, amikor pihenünk, és megjeleníti a pihené-
si képernyőt. Amennyiben 15 másodpercnél hosszabb ideig pihenünk, a ké-
szülék automatikusan pihenő szakaszt iktat be. Amikor folytatjuk az úszást, a
készülék automatikusan új úszási szakaszt indít el. Az automatikus pihenés
funkciót a készülék tevékenység beállításaiban kapcsolhatjuk be és ki ( „Te -
vékenység és alkalmazás beállítások”; 31. oldal ).
TIPP!
A lehető legpontosabb eredmény elérése érdekében pihenés közben
lehetőleg minél kevesebbet mozgassuk a karjainkat.
Amennyiben nem szeretnénk igénybe venni az automatikus pihenés funk-
ciót, a LAP gombot lenyomva manuálisan jelölhetjük a pihenési szakaszok
kezdetét és végét.
Edzés a drill naplóval
A drill napló kizárólag medencei úszás esetén érhető el. A drill naplóval kéz-
zel rögzíthetjük a lábtempós (kick), egykaros úszásokat, illetve minden olyan
edzéstípust, amely eltér a szokásos négy fő úszásnemtől.
1. Medencei úszás közben a DOWN vagy UP gombot röviden lenyomva te-
kintsük meg a drill napló (Gyakorlatnapló) képernyőt.
2. A LAP gombbal indítsuk a drill számlálót.
3. Egy drill szakasz megtételét követően nyomjuk meg a LAP gombot.
A drill számláló leáll, de a tevékenység számláló tovább fut a teljes úszás
tevékenységet tovább rögzítve.
4. Adjuk meg a befejezett drill távolságát.
A távolság lépésközök a tevékenység profilhoz választott medencehossz-
tól függően változnak.
5. Válasszunk az alábbi lehetőségek közül:
• Újabb drill szakasz indításához nyomjuk meg a LAP gombot.
• Úszás szakasz indításához az UP vagy DOWN gombbal lépjünk vissza
az úszás edzési képernyőkre.
Csukló alapú pulzusszámmérés kikapcsolása
A készüléken a csukló alapú pulzusszám mérés úszási tevékenységekhez
alapbeállítás szerint be van kapcsolva. A készülék a HRM-Tri és HRM-Swim
kiegészítőkkel is kompatibilis. Amennyiben csukló alapú pulzus adat és mell-
kasi pulzusmérő által biztosított adat is rendelkezésre áll, a készülék automa-
tikusan a mellkasi mérőn mért pulzusszám adatokat használja fel.
1. A pulzusszám widget megtekintése közben nyomjuk le hosszan a MENU
gombot.
Megjegyzés! Amennyiben a widget sorban nem szerepel a pulzusszám
widget, azt hozzá kell adnunk ( „Widget sor beállítása”; 35. oldal ).
2. Válasszuk az Opciók > Úszás közben > Kikapcsol pontot.
Golfozás
Golfozás előtt bizonyosodjunk meg róla, hogy az eszköz fel van töltve ( „Ké -
szülék töltése”; 2. oldal ).
1. Az óra számlapon nyomjuk meg a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Getting Started
When using your watch the first time, you should complete these
tasks to set it up and get to know the basic features.
1
Press LIGHT to turn on the watch (
Buttons
, page 1 ).
2
Follow the on-screen instructions to complete the initial
setup.
During the initial setup, you can pair your smartphone with
your watch to receive notifications, sync your activities, and
more ( Pairing Your Smartphone , page 2 ).
3
Charge the device (
Charging the Device
, page 2 ).
4
Start an activity (
Starting an Activity
, page 2 ).
Buttons
LIGHT
• Press to turn the backlight on and off.
• Press to turn the device on.
• Hold to view the controls menu.
UP·MENU
• Press to scroll through the widget loop and menus.
• Hold to view the menu.
DOWN
• Press to scroll through the widget loop and menus.
• Press to view the activity list and start or stop an activity.
• Press to choose an option in a menu.
BACK·LAP
• Press to return to the previous screen.
• Press to record a lap, rest, or transition during a multisport
activity.
• Hold to view the watch face from any screen.
Using the Watch
• Hold LIGHT to view the controls menu.
The controls menu provides quick access to frequently used
functions, such as turning on do not disturb mode, saving a
location, and turning the watch off.
• From the watch face, press UP or DOWN to scroll through
the widget loop.
Your watch comes preloaded with widgets that provide at-a-
glance information. More widgets are available when you pair
your watch with a smartphone.
• From the watch face, press to start an activity or open an
app (
Activities and Apps
, page 2 ).
• Hold MENU to customize the watch face, adjust settings, and
pair wireless sensors.
Viewing the Controls Menu
The controls menu contains options, such as turning on do not
disturb mode, locking the keys, and turning the device off. You
can also open the Garmin Pay
™
wallet.
NOTE: You can add, reorder, and remove the options in the
controls menu (
Customizing the Controls Menu
, page 36 ).
1
From any screen, hold LIGHT .
2
Press UP or DOWN to scroll through the options.
Enabling Airplane Mode
You can enable airplane mode to disable all wireless
communications.
NOTE: You can add options to the controls menu (
Customizing
the Controls Menu
, page 36 ).
1
Hold
LIGHT
.
2
Select .
Viewing Widgets
Your device comes preloaded with several widgets, and more
are available when you pair your device with a smartphone.
• Press
UP or DOWN .
The device scrolls through the widget loop and displays
summary data for each widget.
• Press to view widget details.
TIP: You can press DOWN to view additional screens for a
widget, or press to view additional options and functions
for a widget.
• From any screen, hold BACK to return to the watch face.
• If you are recording an activity, press BACK to return to the
activity data pages.
Customizing the Watch
• From the watch face, hold MENU to change the watch face.
• From the widget screens, hold MENU to customize the
widget options.
• From the controls menu, hold MENU to add, remove, and
reorder the controls.
• From any screen, hold MENU to change additional settings.
Introduction 1
gombot, majd válasszuk a Golf
pontot.
2. Menjünk ki szabad, fedetlen helyre, majd várjunk, amíg a műholdas kap-
csolat létrejön.
3. Az elérhető pályák közül válasszuk ki a kívánt pályát.
4.
Amennyiben szükséges, adjuk meg ütési távolságunkat.
5. Az Igen t választva rögzítjük a pontszámokat.
6. Az UP vagy DOWN gombokkal válthatunk a lyukak között.
Amikor a következő lyukhoz települünk, a készülék automatikusan végre-
hajtja a váltást.
6.
A játék végén nyomjuk meg a
START
gombot, majd válasszuk a
Kör
lezárása t.
Lyuk adatok
A készülék kimutatja az aktuális lyukat, illetve amikor a következő lyukhoz te-
lepülünk, automatikusa végrehajtja a váltást.
MEGJEGYZÉS! Mivel a zászlók helyzete változik, a készülék méri a green
elejének, közepének és végének távolságát, de nem a zászló helyzetét.
Stroke Types
Stroke type identification is available only for pool swimming.
Your stroke type is identified at the end of a length. Stroke types
appear in your swimming history and in your Garmin Connect
account. You can also select stroke type as a custom data field
( Customizing the Data Screens , page 32 ).
Free Freestyle
Back Backstroke
Breast Breaststroke
Fly
Butterfly
Mixed More than one stroke type in an interval
Drill
Used with drill logging (
Training with the Drill Log
, page 7 )
Tips for Swimming Activities
• Before starting a pool swimming activity, follow the on-screen
instructions to select your pool size or enter a custom size.
The next time you start a pool swimming activity, the device
uses this pool size. You can hold MENU, select the activity
settings, and select Pool Size to change the size.
• Press LAP to record a rest during pool swimming.
The device automatically records swim intervals and lengths
for pool swimming.
• Press LAP to record an interval during open water swimming.
Resting During Pool Swimming
The default rest screen displays two rest timers. It also displays
time and distance for the last completed interval.
NOTE: Swim data is not recorded during a rest.
1
During your swim activity, press
LAP
to start a rest.
The display reverses to white text on a black background,
and the rest screen appears.
2
During a rest, press
UP
or
DOWN
to view other data screens
(optional).
3
Press LAP , and continue swimming.
4
Repeat for additional rest intervals.
Auto Rest
The auto rest feature is available only for pool swimming. Your
device automatically detects when you are resting, and the rest
screen appears. If you rest for more than 15 seconds, the device
automatically creates a rest interval. When you resume
swimming, the device automatically starts a new swim interval.
You can turn on the auto rest feature in the activity options
(
Activities and App Settings
, page 31 ).
TIP: For best results using the auto rest feature, minimize your
arm motions while resting.
If you do not want to use the auto rest feature, you can select
LAP to manually mark the beginning and end of each rest
interval.
Training with the Drill Log
The drill log feature is available only for pool swimming. You can
use the drill log feature to manually record kick sets, one-arm
swimming, or any type of swimming that is not one of the four
major strokes.
1
During your pool swim activity, press UP or DOWN to view
the drill log screen.
2
Press LAP to start the drill timer.
3
After you complete a drill interval, press LAP .
The drill timer stops, but the activity timer continues to record
the entire swim session.
4
Select a distance for the completed drill.
Distance increments are based on the pool size selected for
the activity profile.
5
Select an option:
• To start another drill interval, press LAP .
• To start a swim interval, press UP or DOWN to return to
the swim training screens.
Turning Off Wrist-based Heart Rate While Swimming
Wrist-based heart rate is turned on by default for swim activities.
The device is also compatible with the HRM-Pro accessory and
the HRM-Swim
™
accessory. If both wrist-based heart rate and
chest heart rate data are available, your device uses the chest
heart rate data.
1
From the heart rate widget, hold MENU .
NOTE: You may need to add the widget to your widget loop
(
Customizing the Widget Loop
, page 35 ).
2
Select Heart Rate Options > While Swimming > Off .
Golfing
Playing Golf
Before you play a course for the first time, you must download it
from the Garmin Connect app ( Garmin Connect , page 11 ).
Courses downloaded from the Garmin Connect app are updated
automatically.
Before you play golf, you should charge the device (
Charging
the Device
, page 2 ).
1
From the watch face, press .
2
Select
Golf
.
3
Go outside, and wait while the device locates satellites.
4
Select a course from the list of available courses.
5
Select Yes to keep score.
6
Select a tee box.
7
Press UP or DOWN to scroll through the holes.
The device automatically transitions when you move to the
next hole.
8
After you complete your round, press , and select End
Round .
Hole Information
The device shows the current hole you are playing, and
automatically transitions when you move to a new hole.
NOTE: Because pin locations change, the device calculates the
distance to the front, middle, and back of the green, but not the
actual pin location.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
Activities and Apps 7
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers
.
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select Move Flag .
3
Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press DOWN to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2 Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
( Viewing Layup and Dogleg Distances , page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2 From the hole information screen, press .
3
Select
Custom Targets
.
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select Scorecard .
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press
UP
or
DOWN
to scroll through the holes.
4
Press to select a hole.
5
Press
UP
or
DOWN
to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
Aktuális lyuk száma.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select
Move Flag
.
3
Press
UP
or
DOWN
to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press DOWN to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
(
Viewing Layup and Dogleg Distances
, page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1 From the hole information screen, press .
2
Select
Scorecard
.
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
A green hátuljának távolsága.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select
Move Flag
.
3
Press
UP
or
DOWN
to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press DOWN to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
(
Viewing Layup and Dogleg Distances
, page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select
Scorecard
.
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
A green közepének távolsága.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select
Move Flag
.
3
Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press DOWN to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
(
Viewing Layup and Dogleg Distances
, page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select
Scorecard
.
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
A green elejének távolsága.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press UP or DOWN to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select Move Flag .
3
Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP: Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select Measure Shot .
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press DOWN to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
(
Viewing Layup and Dogleg Distances
, page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select
Scorecard
.
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
A lyuk „par” száma.
Current hole number
Distance to the back of the green
Distance to the middle of the green
Distance to the front of the green
Par for the hole
Map of the green
Driver distance from the tee box
Big Numbers Mode
You can change the size of the numbers on the hole information
screen.
Hold
MENU , select the activity settings, and select Big
Numbers .
The distance to the back of the green
The distance to the middle of the green or selected pin position
The distance to the front of the green
The current hole number
The par for the current hole
Measuring Distance with Button Targeting
From the hole information screen, you can use the button
targeting feature to measure the distance to a point on the map.
1
Press
UP
or
DOWN
to measure the distance to the target.
2
If necessary, select or to zoom in or out.
Changing Holes
You can change holes manually from the hole view screen.
1
While playing golf, press .
2
Select Change Hole .
3
Select a hole.
Moving the Flag
You can take a closer look at the green and move the pin
location.
1
From the hole information screen, press .
2
Select Move Flag .
3 Press UP or DOWN to move the pin position.
4
Press .
The distances on the hole information screen are updated to
show the new pin location. The pin location is saved for only
the current round.
Viewing Measured Shots
Before the device can automatically detect and measure shots,
you must enable scoring.
Your device features automatic shot detection and recording.
Each time you take a shot along the fairway, the device records
your shot distance so you can view it later.
TIP:
Automatic shot detection works best when you wear the
device on your leading wrist and make good contact with the
ball. Putts are not detected.
1
While playing golf, press .
2
Select
Measure Shot
.
Your last shot distance appears.
NOTE: The distance automatically resets when you hit the
ball again, putt on the green, or move to the next hole.
3
Press DOWN to view all recorded shot distances.
Viewing Layup and Dogleg Distances
You can view a list of layup and dogleg distances for par 4 and 5
holes. Custom targets also appear in this list.
1
From the hole information screen, press .
2
Select Layups .
Each layup and the distance until you reach each layup
appear on the screen.
NOTE: Distances are removed from the list as you pass
them.
Saving Custom Targets
While playing a round, you can save up to five custom targets
for each hole. Saving a target is useful for recording objects or
obstacles that are not shown on the map. You can view the
distances to these targets from the layup and dogleg screen
(
Viewing Layup and Dogleg Distances
, page 6 ).
1
Stand near the target you want to save.
NOTE: You cannot save a target that is far from the currently
selected hole.
2
From the hole information screen, press .
3
Select Custom Targets .
4
Select a target type.
Keeping Score
1
From the hole information screen, press .
2
Select Scorecard .
The scorecard appears when you are on the green.
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to set the score.
Your total score is updated.
Updating a Score
1
From the hole information screen, press .
2
Select Scorecard .
3
Press UP or DOWN to scroll through the holes.
4
Press to select a hole.
5
Press UP or DOWN to change the score for that hole.
Your total score is updated.
Setting the Scoring Method
You can change the method the device uses to keep score.
1
From the hole information screen, hold MENU .
2
Select the activity settings.
3
Select Scoring Method .
4
Select a scoring method.
6 Activities and Apps
A green térképe.
Nagy számok üzemmód
A számok méretét a lyuk adatok képernyőn módosíthatjuk.
Nyomjuk le hosszan a
MENU gombot, majd válasszuk ki a tevékenység be-
állításokat, és válasszuk a
Nagy számok
pontot.