Installing the Device in the Cradle
After the cables are connected to the cradle, you can quickly
place the device in the cradle.
1
Place the base of the device in the bottom of the cradle.
2
Tilt the top of the device toward the cradle until it fastens in
place.
There is an audible click when the device is secured in the
cradle.
NOTICE
You should make sure the device is firmly secured in the cradle.
If the model uses a locking bracket, make sure the bracket is
firmly snapped shut. There is an audible click when the device
or locking bracket is installed correctly. If the device is not firmly
secured, it can lose power. The device can also fall out of the
cradle and become damaged if it is not firmly secured.
Removing the Device from the Cradle
1
Press the release lever
À
on the cradle until the device is
released.
2
Tilt the device forward, and lift it out of the cradle.
Specifications
Specification
Measurement
Dimensions on mount (W x H x
D)
102.3 x 203.9 x 4.6 mm (4 x 8 x
3
1
/
8
in.)
Weight
0.7 kg (1.6 lbs.)
Display size (W x H)
53.9 x 95.0 mm (2
1
/
8
x 3
3
/
4
in.)
Display type
WQVGA
Display resolution
480 x 272 pixels
Material
Polycarbonate plastic
Water rating
1
IEC 60529 IPX7
Temperature range
From -15 to 55°C (from 5 to 131°F)
Fuse
3 A, 125 V fast-acting
Input voltage
From 9 to 18 Vdc
Max. power draw
2
5 W
Typical current draw (RMS)
2
0.5 A
Max. current draw (RMS)
2
2 A
Compass-safe distance
25 cm (9.8 in.)
Sonar frequencies
3
Traditional: 50, 77, 83, or 200 kHz
CHIRP Garmin ClearVü: 260, 455, or
800 kHz
Transmit power (RMS)
3
500 W
Maximum depth
4
701 m (2,300 ft) at 77 kHz
Memory card
1 microSD
®
card slot; 32 GB max. card
size
Max. waypoints
5,000
Specification
Measurement
Max. routes
100
Max. active track points
50,000 points, 50 saved tracks
1
The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to
.
2
Dependent upon transducer and chartplotter model.
3
Dependent upon transducer.
4
Maximum depth is dependent upon transducer, water salinity,
bottom type, and other water conditions.
NMEA 0183 Information
Type
Sentence
Description
Transmit GPAPB
APB: Heading or track controller
(autopilot) sentence "B"
GPBOD
BOD: Bearing (origin to destination)
GPBWC
BWC: Bearing and distance to waypoint
GPGGA
GGA: Global positioning system fix
data
GPGLL
GLL: Geographic position (latitude and
longitude)
GPGSA
GSA: GNSS DOP and active satellites
GPGSV
GSV: GNSS satellites in view
GPRMB
RMB: Recommended minimum
navigation information
GPRMC
RMC: Recommended minimum specific
GNSS data
GPRTE
RTE: Routes
GPVTG
VTG: Course over ground and ground
speed
GPWPL
WPL: Waypoint location
GPXTE
XTE: Cross track error
PGRME
E: Estimated error
PGRMM
M: Map datum
PGRMZ
Z: Altitude
SDDBT
DBT: Depth below transducer
SDDPT
DPT: Depth
SDMTW
MTW: Water temperature
SDVHW
VHW: Water speed and heading
Receive DPT
Depth
DBT
Depth below transducer
MTW
Water temperature
VHW
Water speed and heading
WPL
Waypoint location
DSC
Digital selective calling information
DSE
Expanded digital selective calling
HDG
Heading, deviation, and variation
HDM
Heading, magnetic
MWD
Wind direction and speed
MDA
Meteorological composite
MWV
Wind speed and angle
VDM
AIS VHF data-link message
You can purchase complete information about National
Marine Electronics Association (NMEA) format and
sentences from: NMEA, Seven Riggs Avenue, Severna Park,
MD 21146 USA (
)
© 2017 Garmin Ltd. or its subsidiaries
Garmin
®
and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries,
registered in the USA and other countries. ECHOMAP
™
, Garmin ClearVü
™
, and Garmin
Quickdraw
™
are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may
not be used without the express permission of Garmin.
4
Содержание Echomap Plus 40 series
Страница 6: ......