Garmin DA42-L360, Руководство по эксплуатации кабины

Страница: 45 / 102

Garmin G1000 Cockpit Reference Guide for the DA42-L360 190-01062-01 Rev. A
29
Flight planning
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
COpY A Flight plAn
1)
Press the
FPL
Key on the MFD.
2)
Turn the small FMS Knob to select the Flight Plan Catalog Page.
3)
Press the FMS
Knob
to activate the cursor.
4) Turn the large FMS Knob to highlight the flight plan to be copied.
5) Press the COPY Softkey. A ‘Copy to flight plan #?’ confirmation window is
displayed.
6) With ‘OK’ highlighted, press the ENT Key to copy the flight plan. To cancel,
turn the large FMS Knob to highlight ‘CANCEL’ and press the ENT Key.
Delete A Flight plAn
1) Press the FPL Key on the MFD.
2)
Turn the small
FMS
Knob to select the Flight Plan Catalog Page.
3)
Press the
FMS Knob
to activate the cursor.
4)
Turn the large
FMS
Knob to highlight the flight plan to be deleted.
5)
Press the DELETE Softkey. A ‘Delete flight plan #?’ confirmation window is
displayed.
6)
With ‘OK’ highlighted, press the ENT Key to delete the flight plan. To cancel,
turn the large
FMS
Knob to highlight ‘CANCEL’ and press the
ENT
Key.
grAphiCAl Flight plAn CreAtiOn
1)
Press the
FPL
Key to display the Active Flight Plan Page on the MFD.
2)
Press the Joystick to activate the map pointer. Use the Joystick to move
the pointer to the desired point on the map to be inserted as a waypoint in
the flight plan.
3)
The default insertion point is at the end of the flight plan. If the selected
waypoint is to be placed anywhere other than the end of the flight plan,
press the
FMS Knob to activate the cursor. Waypoints are inserted
ABOVE
the cursor. Turn the large FMS Knob to select the desired insertion point.
4) Press the LD WPT Softkey. The selected waypoint is inserted at the selected
point. The default user waypoint naming is USR000, USR001, USR002, and
so on.
5) To change the user waypoint name, follow the procedure for modifying a user
waypoint.