Garmin DA42-L360, Руководство по эксплуатации кабины

Страница: 39 / 102

Garmin G1000 Cockpit Reference Guide for the DA42-L360 190-01062-01 Rev. A
23
Flight planning
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal Oper
ation
Annun/
Alerts
Appendix
Index
CreAte A neW user WAYpOint
1)
Turn the large
FMS
Knob to select the ‘WPT’ page group.
2)
Turn the small FMS Knob to select the User WPT Information Page.
3) Press the NEW Softkey. A waypoint is created at the current aircraft
position.
4) Enter the desired waypoint name.
5) Press the ENT Key.
6)
The cursor is now in the ‘REFERENCE WAYPOINTS’ field. If desired, the
waypoint can be defined by a reference waypoint. Use one of the following
methods to enter the reference waypoint:
a) Turn the small FMS Knob to the left to display a list of flight plan
waypoints. This list is populated only when there is an active flight
plan.
b) Turn the large FMS Knob to select the desired waypoint.
c) Press the ENT Key.
Or:
a)
Turn the small
FMS
Knob to the left. Initially, a flight plan waypoint list
is displayed.
b)
Turn the small
FMS
Knob to the right to display the ‘NRST’ airports to
the aircraft’s current position.
c)
Turn the large
FMS
Knob to select the desired waypoint.
d)
Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the ‘RECENT’
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d)
Press the
ENT
Key.
7)
After pressing the
ENT
Key, the cursor is displayed in the ‘RAD’ (radial)
field. Enter the desired radial from the reference waypoint.
8)
Press the
ENT
Key.