Garmin DA42 G1000, Руководство по эксплуатации кабины, Страница: 38 / 96

Garmin G1000 Cockpit Reference Guide for the DA42 190-00406-06 Rev. A
22
Flight Planning
Fl
ig
ht
In
st
ru
m
en
ts
EI
S
N
av
/C
om
/
XP
D
R/
A
ud
io
A
FC
S
G
PS
N
av
Fl
ig
ht
Pl
an
ni
ng
Pr
oc
ed
ur
es
H
az
ar
d
Av
oi
da
nc
e
A
dd
iti
on
al
Fe
at
ur
es
A
bn
or
m
al
O
pe
ra
tio
n
A
nn
un
/
A
le
rt
s
A
pp
en
di
x
In
de
x
Selecting ‘FPL 00’ displays the active flight plan. If an active flight plan
is selected, ‘REM’ is an available option to display planning data for the
remainder of the flight plan.
NOTE: The page mode must be set to ‘MANUAL’ to perform the following
steps.
5)
Turn the large FMS Knob to highlight the departure time (DEP TIME) field.
NOTE: The departure time on the Trip Planning Page is used for preflight
planning. Refer to the Utility Page for the actual flight departure time.
6)
Enter the departure time. Press the
ENT
Key when finished. Departure time
may be entered in local or UTC time, depending upon system settings.
7)
Enter the fuel flow. Press the
ENT
Key when finished. Note that in ‘AUTOMATIC’
page mode, fuel flow is provided by the system.
8)
The flashing cursor moves to the fuel onboard field. Modify the fuel onboard.
Press the
ENT Key when finished.
9)
The flashing cursor moves to the calibrated airspeed field. Enter a calibrated
airspeed. Press the
ENT
Key when finished.
CREATE A NEW USER WAYPOINT
1)
Turn the large
FMS
Knob to select the ‘WPT’ page group.
2)
Turn the small FMS Knob to select the User WPT Information Page.
3)
Press the
NEW
Softkey. A waypoint is created at the current aircraft
position.
4)
Enter the desired waypoint name.
5) Press the ENT Key.
6)
The cursor is now in the ‘REFERENCE WAYPOINTS’ field. If desired, the
waypoint can be defined by a reference waypoint. Use one of the following
methods to enter the reference waypoint:
a) Turn the small FMS Knob to the left to display a list of flight plan
waypoints. This list is populated only when there is an active flight
plan.
b)
Turn the large
FMS
Knob to select the desired waypoint.
c)
Press the
ENT
Key.