cGPSmapper Manual
FAQs
http://cgpsmapper.com/
65 of 100
7
FAQs
7.1
Name variables and where they show up
7.1.1
Introduction
There are three locations where the names of maps, map sets, and related information
("name data") are specified:
•
the
PFM
file;
•
the
PFM
Preview file; and
•
sendmap
options.
There are various locations where the name data is displayed both on the GPS unit and in
the Garmin MapSource software. Figure 4 shows the relationship between where the name
data is specified and where it is displayed.
7.1.2
PFM File
The name data in the
PFM
file is used to describe a single
PFM
file as opposed to a
collection of
PFM
files. The name data is specified between the
[IMG ID]
tags.
[IMG ID]
Name=map_name
The name of the map. This field is the first field displayed on
the GPS unit under the "Map Information" section. It is
displayed in the MapSource software on the "maps" tab
when the map is selected and in the Map Properties window.
NOTE:
The name field will not be displayed on the GPS
unit if the
ID
field in the
PFM
is not specified as a decimal
field or is not listed correctly.
11.2.2
PFM Preview File
The name data in the
PFM
Preview File is used to describe a collection of
PFM
files. The
name data is specified between the
[Map]
tags.
[MAP]
MapsourceName=x
xxxxxx
The Product name. This field is not displayed on the GPS
unit. This field is displayed on the product menu bar and
product menu in the MapSource software.
MapSetName=xxxx
xxx
The Area name. This field is the second field displayed on
the GPS unit under the "Map Information" section. It is
displayed in the MapSource software on the "maps" tab
when the map is selected and in the Map Properties window.
CDSetName=xxxxx
xx
The CD Set Name. This field is not displayed on the GPS
unit. This field is displayed in the MapSource software when
displaying the Product Information.