background image

AIS 600 Instructions

 

 

 

Notes:

The 
AIS 600 must be connected to the included GA

 30 GPS antenna. 

The 
AIS 600 does not share GPS information with any other devices on the boat. If you have a chartplotter 

on your boat, it must receive GPS information from a separate antenna, such as a GPS 17x.

** 

The 
AIS 600 does not need to be installed alongside a VHF radio, but they can share the same VHF antenna if they are both installed on your boat.

See 

page 8

 for silent 

mode and SRM  

message wiring 

assignments

Silent-mode switch

(optional - not included)

SRM message switch

(optional - not included)

VHF
 radio**

(optional - not 

included)

GA

 0 GPS antenna* 

(included)

GPS 17x GPS antenna*

 

(not included)

Chartplotter

(optional - not 

included)

NMEA 000 network—

page 7

 

NMEA

 000 network power 

(not included)

RF

 cable to VHF

 antenna

(not included)

RF

 interconnect cable 

(included)

AIS 600 power/data cable  (included)

NMEA

 000 drop cable 

(included)

1

 or 

4 Vdc

Chartplotter power

VHF radio power

AIS 600 W

iring Layout: 

AIS 600 Connected to a Chartplotter through 

a NMEA

 2000 Network

SRM cable - included

AIS 600

Содержание AIS 600













Отзывы: