Each time an alphanumeric character is entered, press the
CRSR
Key to move the cursor
to the next blank field. Pressing the
CLR
Key moves the cursor back to the previous character.
After the complete
FLT ID
is entered, press the
CRSR
Key to move the cursor to the “OK?”
field. Press
CRSR
again to accept the
FLT ID
.
When
FLT ID
entry is complete the transponder begins normal operation.
If an error is made while entering a
FLT ID
, press the
CLR
Key to back up to any point,
including highlighting the “OK?” field. If an incorrect
FLT ID
is discovered after the unit
begins operation, turn the GTX 328 off. Then turn it back on again and reenter the correct
FLT ID
.
Audio Alerts
(Setting options; male/female voice or tone, and volume level.)
• “Leaving Altitude” Altitude deviation is exceeded.
• “Timer Expired” for countdown time.
Содержание 328
Страница 1: ...Mode S Transponder pilot s guide GTX 328 ...