background image

Limited Warranty

This Garmin product is warranted to be free from defects in materials or workmanship for 

two years from the date of purchase.  Within this period, Garmin will at its sole option, repair 
or replace any components that fail in normal use.  Such repairs or replacement will be made 
at no charge to the customer for parts or labor, provided that the customer shall be responsible 
for any transportation cost.  This warranty does not cover failures due to abuse, misuse, 
accident or unauthorized alteration or repairs.

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN 

LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING 
ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE.  THIS WARRANTY GIVES 
YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.

IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT 

OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR 
INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT.  Some states 
do not allow the exclusion of incidental or consequential damages, so the above limitations 
may not apply to you.

Garmin retains the exclusive right to repair or replace the unit or software or offer a full 

refund of the purchase price at its sole discretion.  SUCH REMEDY SHALL BE YOUR SOLE 
AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.

To obtain warranty service, contact your local Garmin Authorized Service Center.  For 

assistance in locating a Service Center near you, visit the Garmin website (www.garmin.com) 
or call Garmin Customer Service at one of the numbers shown below.

Garmin International, Inc.   

      Garmin (Europe) Ltd.

1200 East 151st Street 

 

      Unit 5, The Quadrangle, Abbey Park 

Olathe, Kansas 66062, U.S.A. 

      Industrial Estate, Romsey, SO51 9DL, U.K.

Phone: 

913/397.8200 

      Phone: 

44/0870.8501241

FAX:   

913/397.8282 

      FAX:   

44/0870.8501251   

 

NOTE:  

The expected coverage from the GTX 328 is limited to “line of 

sight”.  Low altitude or aircraft antenna shielding by the aircraft itself may 
result in reduced range.  Range can be improved by climbing to a higher 
altitude.  It may be possible to minimize antenna shielding by locating 
the antenna where dead spots are only noticed during abnormal flight 
attitudes.

Содержание 328











Отзывы: