Garmin 182/182C, Руководство пользователя

Страница: 115 / 126

GPSMAP 182/182C Owner’s Manual 109
A
PPENDIX
> L
ORAN
TD S
YSTEM
The LORAN Position Format field is located on the Setup–
Location tab on the Main Menu. The LORAN TD Setup window
contains the fields to select the Loran GRI-Chain Number, Primary
and Secondary Stations, and TD Offsets.
To set up Loran TD from the Main Menu:
1. Press MENU twice to display the Main Menu.
2. Using the
ROCKER
, highlight the
Position Format
field on
the
Units
tab, and press
ENTER
.
3. Highlight Loran TD and press ENTER
.
4. Highlight
Setup
and press
ENTER
.
5. To change the settings of any of the five fields, highlight
the field, press ENTER , select/enter the setting, and press
ENTER .
6. When finished, highlight
Save
, and press
ENTER
.
Loran TD Setup Page
If the active GRI Chain, secondary stations, or offsets were
changed since the waypoint was created, the waypoint now
references the active GRI-chain and secondary stations. You must
adjust the TD coordinates accordingly. Remember that the GPS
is not relying on the LORAN signal for navigation and actually
converts the TD coordinate to a useful LAT/LON coordinate before
storing the waypoint to memory or using it for navigation. Because
of this, the unit can navigate to a TD coordinate anywhere in the
world.
You must know your GRI chain number and secondary stations
to create a LORAN TD position. For more information, read
our LORAN TD Position Format Handbook, available from the
Garmin Web site (www.garmin.com/support/userManual.jsp.)