6
9. TEMPERATURE CONTROLLER
provides a
readout of the booth internal temperature and current
set-point (one for spray and one, or three for bake
depending on controller option). Some units will
have a dial indicators i.e. model 99270 heater.
10. EXHAUST FAN PILOT LIGHT (GREEN)
when lit indicates all is well with the exhaust motor
and the exhaust fan is running.
11. INTAKE FAN PILOT LIGHT (GREEN
)
when lit indicates all is well with the intake motor
and that the intake fan is running.
12. BURNER PILOT LIGHT (GREEN)
when lit
indicates power has been given to the burner
safeguard system.
13. PHOTOHELIC
provides readout of interior
booth pressure and is set to maintain the cabin
pressure automatically.
DELUXE W/TOUCH SCREEN OPTION:
1. EMERGENCY (EM) STOP SWITCH,
is red
in color.
2. LIGHTS ON/OFF SWITCH,
located on the
touch screen, dark green when off and light green
when on.
3. OFF/SPRAY/BAKE SWITCH,
located on the
touch screen. The display bar at the bottom of the
switch displays cycle of operation.
4. BURNER SUMMER/WINTER SWITCH
,
located on the touch screen, on the burner window.
5. THE INTAKE LIGHT (GREEN )
OR(RED), THE EXHAUST LIGHT ( GREEN)
OR (RED), THE BURNER LIGHT (GREEN)
OR (RED).
When these light are showing
(green), operation is normal. When these lights are
showing (red), an alarm is taking place.
6. HOURMETER
, located on the touch screen,
records total hours of operation. The hour display
window shows spray and bake time in hours and
minutes. The hour meter is used to notify the
need for filter replacement, based on spray hours
of use.
7. BAKE TIMERS
, are energized only during the
bake mode. The bake timers are located on the
touch screen in the bake timers display window.
There is a bake time count down on the main
screen of the touch screen.
8. TEMPERATURE CONTROL
, is located on
the touch screen, on the burner display window
and provides a readout of the booth internal
temperature and current set-point (one for spray
and three for bake.
9. CABIN PRESSURE
, cabin pressure is
displayed on the main screen of the touch screen. It
provides readout of interior booth pressure and is
set to maintain the cabin pressure automatically or
manually from the maintenance display screen.
MAIN ELECTRICAL PANEL
The control panel is fully described in the
maintenance section of this manual.
The control panel is mounted to the side of the
intake plenum near the booth front. It is white in
color and contains the power and operational
controls for the booth.
WARNING: THE MAIN ELECTRICAL
PANEL IS SUPPLIED BY TWO SOURCES
OF ELECTRICAL POWER. INSURE BOTH
SOURCES ARE DISCONNECTED BEFORE
