Garlando toorx EXPERIENCE, Инструкция по эксплуатации

Страница: 14 / 19

- 17 -
8. the heart rate will decelerate by 1.0 (2.0) km/h. , Then decelerate to 1 km/h.
The slope is not controlled by the heart rate and can be adjusted manually.
The starting speed is 1 km/h, and the heart rate is not used for 1 minute before running.
Manual adjustment of speed and tilt is also available. The adjustment will be for the
current 30 segments. When passed to the next step, the speed/tilt value will follow
the HRC rules. Press the mode and the user can stop the HRC and run in the manual
program
i)
【
USER setting
In the standby state, press the USER button to select U1
—U4, and press ENTER to set the time.
The following is the setting method of 30-segment data of USER program
1) Press ENTER to enter the time window (the window should flash), adjust the time with
2) speed +-, press the ENTER button to enter the dot matrix window 30-segment
3) programming (speed default 1.0, slope default 0), adjust the speed value with
4) speed plus and minus ; Use slope +- to adjust the slope value, after each section
5) of the dot matrix window is set, press ENTER to enter the next section of setting,
2) The second step will flash-repeat all 30 steps
3) After setting all the 30-segment programs, press ENTER to return to the flashing
state of the USER name, indicating that all the data has been recorded. At this time,
you can press ENTER to set the running time. You can also directly press START to
directly start running. Countdown at 0:00, the treadmill stops
j)
【
Body Fat
】
Test mode
Press BODY FAT in standby mode to enter the fat measurement mode
Time window display: gender, default value: S-1, setting range: 1-2 1 = male 2 = female
Energy window display: age, default value: 25 years old, setting range: 10-99 years old
Slope window display: height, default value: 170cm, setting range 100-220cm
Step number window display: weight, default value: 70kg, setting range 20-150kg
1) Press ENTER to enter the setting, use the speed +- button to adjust gender, age,
2) height and weight
2) After setting the parameters, press ENTER and the matrix window displays 0.0
3) At this time, put your hands on the heart rate grip, the matrix window will display
the measured body fat value after 8 seconds..
k) fixed program diagrams,