Garland XE24, Инструкции по установке, эксплуатации и обслуживанию

Страница: 6 / 32

Part # 4517125 (09/03) Page 6
SAFETY PRECAUTIONS
Always follow these safety precautions when operating
the Xpress Grill.
• THIS GRILL MUST
be operated by persons who
have been given adequate training.
• THIS EQUIPMENT MUST ONLY BE
OPERATED UNDER AN APPROVED HOOD
SYSTEM.
• DO NOT
operate the grill without reading this
operation manual.
• DO NOT operate the Xpress grill unless all
service and access panels are in place and fastened
properly.
The Garland Xpress Grill is a semi-automatic cooking
appliance. The upper platen is lowered automatically,
following the manual, two-handed initiation of the
cooking cycle, and the upper platen is raised automatically
upon completion of the cooking cycle.
When two sided cooking, the area between the upper
platen and the griddle plate should be regarded as a
“danger zone.” During two sided cooking the operator
must not be within this danger zone. When used as a
flat grill, then this area is no longer a danger zone, the
platens do not move.
For whatever reason, be it cleaning, maintenance, or
normal operation, any exposed person must use extreme
caution if within this danger zone.
In two side cooking the upper platen remains in the
lowered position by nature of its own weight. It is not
locked down. It can be raised by lifting up on the handle
on the front of the platen.
The Xpress Grill may during its operation emit airborne
noise equivalent to a continuous A weighted sound
pressure level of 73dB(A).
WARNING: To avoid serious personal injury:
• DO NOT
attempt to repair or replace any part of
the Xpress Grill unless all main power supplies to
the grill have been disconnected.
• USE EXTREME CAUTION in setting up,
operating and cleaning the Xpress Grill to avoid
coming in contact with hot grill surfaces or hot
grease. Suitable protective clothing should be worn
to prevent the risk of burns.
• DO NOT clean this appliance with a water jet.
• DO NOT
apply ICE or COLD WATER to a
HOT grill surface.
• NOTE all warning labels and markings affixed to
the grill.
WARNING: After turning the master power switch
to the START position, the grill will go through
initialization. If the upper platens are in the lowered
position they will return to their raised upper position.
This movement takes approximately 8 seconds.