Garland SIOUX 1255 ZESG, Инструкция по эксплуатации, Страница: 46 / 152

English
46/172
case, more than absolutely necessary do not tilt it, and
lift only the part farthest from the operator.
6.3.2.1. COLD ENGINE START
Place the machine on a flat and stable surface to start
it.
Move the air lever to the position
Put the throttle lever in MAX
Raise the safety switch bar until it touches the handle.
Stand behind the mower as shown in fig.1 and pull
the starter rope until the engine starts.
fig. 1
Move the air lever to the position
Set the air lever in a and position
Let the engine warm up for a few minutes before
starting to use the machine.
6.3.2.2. HOT ENGINE START
Place the machine on a flat and stable surface to start
it.
Move the air lever to the position
Set the air lever in a
and position
Raise the safety switch bar until it touches the handle.
Stand behind the mower as shown in fig. 1 and pull
the starter rope until the engine starts.
6.3.2.3. STARTING THE ENGINE WITH ELECTRIC
STARTER (ONLY FOR THE SIOUX 1255 ZESG MODEL)
ATTENTION! Please charge the battery before
using the electric start function, the battery
must be charged for 5 hours. Put the plug of the
charger into the hole on the battery and connect
the charger to a power source.