background image

Part # 4520898 (05/01/14)

Page 1

Users are cautioned that maintenance and repairs must be performed by a Garland authorized service agent 

using genuine Garland replacement parts. Garland will have no obligation with respect to any product that has been 

improperly installed, adjusted, operated or not maintained in accordance with national and local codes or installation 

instructions provided with the product, or any product that has its serial number defaced, obliterated or removed, 

or which has been modified or repaired using unauthorized parts or by unauthorized service agents. 

For a list of authorized service agents, please refer to the Garland web site at http://www.garland-group.com. 

The information contained herein, (including design and parts specifications), may be superseded and is subject 

to change without notice.

Part # 4520898 (05/01/14)

© 2005 Garland Commercial Ranges, Ltd.

FOR YOUR SAFETY:

DO NOT STORE OR USE GASOLINE 

OR OTHER FLAMMABLE VAPORS OR 

LIQUIDS IN THE VICINITY OF 

THIS OR ANY OTHER

APPLIANCE

WARNING:

IMPROPER INSTALLATION, ADJUSTMENT, 
ALTERATION, SERVICE OR MAINTENANCE 
CAN CAUSE PROPERTY DAMAGE, INJURY, 

OR DEATH. READ THE INSTALLATION, 

OPERATING AND MAINTENANCE 

INSTRUCTIONS THOROUGHLY 

BEFORE INSTALLING OR 

SERVICING THIS EQUIPMENT

INSTALLATION AND 

OPERATION MANUAL

GARLAND RTCS TECHNOLOGY BUILT IN 

INDUCTION COOKERS, 

MODELS: BH/IN 2500, SH/IN 3500,SH/IN 5000, 

SH/WO/IN 3500,SH/WO/IN 5000 & SH/WO/IN 8000 

PLEASE READ ALL SECTIONS OF THIS MANUAL 

AND RETAIN FOR FUTURE REFERENCE.

THIS PRODUCT HAS BEEN CERTIFIED AS 

COMMERCIAL COOKING EQUIPMENT AND 
MUST BE INSTALLED BY PROFESSIONAL 
PERSONNEL AS SPECIFIED. 

INSTALLATION AND ELECTRICAL CONNECTION 
MUST COMPLY WITH CURRENT CODES:
IN CANADA - THE CANADIAN ELECTRICAL 
CODE PART 1 AND / OR LOCAL CODES.
IN USA – THE NATIONAL ELECTRICAL CODE 

ANSI / NFPA – CURRENT EDITION.

ENSURE ELECTRICAL SUPPLY CONFORMS WITH 
ELECTRICAL CHARACTERISTICS SHOWN ON 

THE RATING PLATE.

Garland Commercial Ranges Ltd.
1177 Kamato Road, Mississauga,
Ontaion, CANADA L4W 1X4

phone: 905 624 0260
fax: 905 624 5669

www.Garland-Group.com
www.ManitowocFoodservice.com

Содержание SH/IN 5000





























Отзывы: