Garland SCO-ES-10S, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 28

Part Number 4530589 rev B 4/15 9
OPERATING INSTRUCTIONS
Sunfi re 200 Solid State Control with
Electromechanical Timer
In Off Mode
When the oven is off , there are no lights or indicators.
Start Up
Press the Cook/Off /Cool Down rocker switch to the “Cook”
position. The green lamp will light indicating the oven is
powered in cook mode.
The oven will begin to heat to the temperature set on the
thermostat dial. The amber lamp will light indicating the heat
is active. As the heat cycles on and off to maintain the set
temperature this light will go on and off accordingly.
The door must be closed for the oven to operate in cook
mode. Opening the door will cause the heat to stop and the
motor and fan will shut off .
This is a safety feature.
Fan Speed Selection (If equipped)
The fan speed can be either high (1725 RPM) or low (1140
RPM). The fan speed is controlled by the left rocker switch
marked high and low.
Single Fan Speed
Single speed units operate at high (1725 RPM) only and do
not have a fan speed switch on the control panel.
Lights (If equipped)
The oven lights are activated by pressing the light switch
on the control panel. This is a momentary switch and the
lights will only stay lit as long as this button held in the on
position. Lights will work whenever there is electrical power
connected to the oven. Unit not equipped with lights do not
have a light switch on the control panel
Cool Down
Pressing the Cook/Off /Cool down rocker switch to the Cool
down position activates the fan and motor to cool the oven
cavity. The door must be open slightly for the fan and motor
to start. The heat is not active in this mode.
Optimal cool down will be achieved with the door open
slightly. Opening the door too far will shut the fan and motor
off .
This is a patented safety feature.
Pressing the button to the OFF position cancels the cool
down and turns the oven off .
Temperature
The temperature range is from 150° to 500°F (66°ºC to 250ºC)
is controlled by rotating the temperature dial and aligning
the indicator to the desired temperature.
Timer
The timer is set by rotating the dial clockwise aligning the
indicator to the desired time cycle. The timer will count down
from 2 minutes to 60 minutes. At the end of the timing cycle
the buzzer will sound. The buzzer is turned off by rotating the
dial counter-clockwise to the off position as shown on the
control panel.
NOTE: The timer does not control heating.
TIMER
15
25
45
40
50
55
35
30
60
OFF
10
5
0
20
/
200
225
475
TEMP
75C°
150F°
175
100
500
250
225
450
425
400
325
275
250
125
150
300
175
375
200
350
,885 -8@7
,884
8
/
87
98@.;
,885
-8@7
58
12
TEMP TEMP
TIMER
15
25
45
40
50
55
35
30
60
OFF
10
5
0
20
TIMER
15
25
45
40
50
55
35
30
60
OFF
10
5
0
20
200
125
225
200
150F°
75C°
175
100
475
500
250
225
425
450
325
275
250
150
300
400
175
375
350
87
98@.;
125
200
175
75C°
150F°
200
225
100
500
250
475
425
450
225
300
150
250
275 375
175
325 350
400
98@.;
87
/
/
,884
8
8
/
/
,884 12
58
-8@7
,885
Single Speed
Motor Control
Panel
Standard on
SCO-ES-10S/20S
Models
Two Speed Motor
Control Panel
(Optional)
Two Speed Motor
Control Panel with
Oven Interior Light
(Optional)