P1GCCB
Series Portable Tap Installation Guide
The portable network TAP is ideal for 10/100/1000MB copper network monitoring. The innovative design
allows this TAP to be easily installed into any copper 10/100/1000 network segment. Once installed in your
network the 10/100/1000 network TAP will enable you to monitor your network segments quickly and
effectively using a network analyzer, security devices, or any monitoring tool. This 10/100/1000 copper TAP
allows you to capture full-duplex traffic without dropping any packets.
This document is for informational purposes only. The information in this document, believed by Garland Technology to be accurate as of the date of publication, is subject to change without notice. Garland
Technology assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it
contains. Copyright 2013 © Garland Technology LLC. All Rights Reserved.
+1 716.242.8500 ◊ Buffalo, New York ◊ Garland, Texas ◊ www.garlandtechnology.com
Power Connector
Front View
Back View
RMP-1U: 1U Rack Mount Plate holds up to Four (4) Portable TAPs
Two (2) Live Network Ports
Traffic Flow
The copper 10/100/1000 copper taps provides a copy of the directional traffic out each monitoring port.
Monitor Port A provides you a copy of the A -> B traffic
Monitor Port B provides you a copy of the B -> A traffic
Two (2) Monitoring Ports
PORTABLE TAP KEY FEATURES
·
Small portable form factor: 3.942"x1.20"x3.942" (W x H x D)
·
Four (4) Copper RJ-45 Ports
·
Plug-n-Play design with zero configuration
·
Link Speed Synchronization
·
Captures Full Duplex Traffic up to 2 Gigabits without dropping any packets
·
Jumbo Frames up to 16,383
·
Passes physical layer errors
·
Rack Shelf supports up to four (4) TAPs in a 1U space
