background image

User Guide

EdgeSafe Bypass TAP | P10GxxBPE | 4.22.1

5. Select Cancel to return the Admin Settings panel.

 TACACS Test

This option may be used to verify the authentication of a TACACS user, password and

authorization group. The TACACS Test option will be active only if TACACS authentication
has previously been enabled.

1. Select TACACS Test.

The TACACS Test panel will appear.

2. Select Primary.

3. Enter the Username.

4. Enter the Password.

5. Select Test.

The GUI will display the results of the test, “Authentication Test Successful”. As well as

messages for “authentication:Success”, authorization:Success” and
“authorization:group:abcdef.

 TACACS Ping Test

This option may be used to verify the network connectivity from the unit to the TACACS server.

The TACACS Ping option will be active only if TACACS authentication has been previously enabled.

1. Select TACACS 1 Ping.

The GUI will display the results of the ping, “TACACS 1 Ping Successful”.

 TACACS Secondary Authentication

1. Select Enable Secondary.

The TACACS Secondary panel will be displayed.

2. Enter the IP Address, IPv4 or IPv6.

3. Enter the Secret Word, (optional).

4. Select Save to save updates.

5. Select Cancel to return the Admin Settings panel.

 TACACS Test

This option may be used to verify the authentication of a TACACS user, password and

authorization group. The TACACS Test option will be active only if TACACS authentication
has previously been enabled.

1. Select TACACS Test.

The TACACS Test panel will appear.

Garland Technology  |  716.242.8500  |  www.garlandtechnology.com
Copyright © 2022 Garland Technology, LLC. All rights reserved.

18

Содержание P10GMSBPE







































































Отзывы: