Garland MWE3W, Руководство по эксплуатации

Страница: 24 / 36

ГАЗОВЫЕ И ЭЛЕКТРИЧЕСКИЕ ГРИЛИ-«РАКУШКИ» GARLAND С СИСТЕМОЙ РАСПОЗНАВАНИЯ ПРОДУКТА
АРТ. № 4521777 (11/07/08) 24
CONTROL PROGRAMMING
Programming Modes; System Setup
To Change the Temperature Display Units
(fahrenheit / Celcius)
The temperature display units (F or C) will change
the way a temperature is displayed on the controller
(F – Fahrenheit, C – Celcius)
1. With the controller display ON and either displaying
the current menu item or displaying “OFF”, PRESS and
HOLD the button for approximately 3 seconds.
Controller will display previously selected menu item
and its corresponding item number OR “Standby /
Menu Item”.
2. PRESS the AND arrow buttons TOGETHER.
“CONFIGURE” will appear in the display.
3. PRESS the arrow button. “Setup” will appear in the
display
4. PRESS the button. “Temperature Unit” will appear in
the display.
5. PRESS the button. The currently set temperature
unit will flash.
6. PRESS the OR arrow buttons to change the
flashing temperature unit.
7. PRESS the button to save the new setting.
8. PRESS THE 2X to exit the program mode.
To Change the Time Display Units
Changing the Time Display Units will change the way
timing cycles are displayed on the controller.
1. With the controller display ON and either displaying
the current menu item or displaying “OFF”, PRESS and
HOLD the button for approximately 3 seconds.
Controller will display previously selected menu item
and its corresponding item number OR “Standby /
Menu Item”.
2. PRESS the AND arrow buttons TOGETHER.
“CONFIGURE” will appear in the display.
3. PRESS the arrow button. “Setup” will appear in the
display.
4. PRESS the button. “Temperature Unit” will appear in
the display.
5. PRESS the 1X. “Time Unit” will appear in the display.
6. PRESS the button. The current time unit will flash.
7. PRESS the OR arrow buttons to change the
flashing time unit.
for a complete listing of setup functions and their
options, see page 30.
8. PRESS the button to save the new setting
9. PRESS THE 2X to exit the program mode.
To change the Key Chirp (Yes / No)
Changing the Key Chirp On or Off will either turn on or off
the sound of the controller when a button is pressed.
1. With the controller display ON and either displaying
the current menu item or displaying “OFF”, PRESS and
HOLD the button for approximately 3 seconds.
Controller will display previously selected menu item
and its corresponding item number OR “Standby /
Menu Item”.
2. PRESS the AND arrow buttons TOGETHER.
“CONFIGURE” will appear in the display.
3. PRESS the arrow button. “Setup” will appear in the
display
4. PRESS the button. “Temperature Unit” will appear in
the display.
5. PRESS the repeatedly until “Key Chirp” appears in the
display.
6. PRESS the button. The currently set Key Chirp will
flash.
7. PRESS the OR arrow buttons to change the
flashing “YES” or “NO”
8. PRESS the button to save the new setting.
9. PRESS THE 2X to exit the program mode.
To change the Audible
Changing the Audible Sound will change the way the
controller sounds when a timing cycle has completed its
countdown.
1. With the controller display ON and either displaying
the current menu item or displaying “OFF”, PRESS and
HOLD the button for approximately 3 seconds.
Controller will display previously selected menu item
and its corresponding item number OR “Standby /
Menu Item”.