Garland moisture+ MP-GD-10-S Скачать руководство пользователя страница 20

Страница: 20 / 80

Part # MPSM07 (03/24/08)

Page 20

Cool Down Mode will engage when the door is closed, but it

is recommended that Cool Down Mode is operated with the

door slightly open as indicated on the display . If the door is

not open enough, the display will indicate

OPEN THE DOOR SLIGHTLY . If the door is open too far the

display will indicate CLOSE THE DOOR SLIGHTLY .

Start/Cancel

Press this key to begin or end a cook cycle . When in Idle Mode,

press the key once to activate the timer to the most recently

programmed time period, (factory default is 30 minutes) . The

timer will display a countdown of the time remaining .
A cook cycle will not be allowed to start if the oven has not

reached the ready band, (+10°F/-5°F), of the programmed

temperature .
Note: Ensure that ready band option is on, refer to system

programming options .
To cancel a cooking cycle already in progress, press and hold

the Start/Cancel key for three seconds . The timer will stop and

the oven will return to Idle Mode .

Changing the Temperature Scale, (°F or °C)

The control is capable of displaying temperatures in either

Fahrenheit or Celsius, (factory default is Fahrenheit) .
A “phantom” key which functions as a toggle for the two

temperature scales is located to the right of the Cook/Hold

key as shown .

To change the scale, press and hold the phantom key for 3

seconds . The current scale, (‘F’ or ‘C’), will be displayed, then

changed . This can be done at any time while power to the

oven is turned on .

Basic Cook Cycle

NOTE: Before proceeding ensure that the manaul bake option

is on, refer to system program options .
1 . Press the On/Off key once .
2 . Press the Program key once . The display will indicate

PROGRAM COOK TEMP . Use the numeric keys to enter the

desired cook temperature .

OPERATING INSTRUCTIONS, (Deluxe Models)

Programmable Control (Deluxe Models)

The design of the m and its controls allow the use

of various operational feature sets alone or in combination:

traditional (manual), or cook & hold, with or without a core

probe, with or without moisture .
Refer to the section entitled DISPLAY MESSAGES on page 23

for additional information regarding display messages and

related button sequences .

Start-Up

When beginning daily operation, the oven will typically be in

the Off Mode . The display will be blank .
Press the On/Off key once to turn the oven on . The oven

will automatically begin to operate . When started, the

oven will begin heating to the most recently programmed

temperature, (factory default is 300°F) . The ready range is

+10°F/-5°F .
The fan will operate at the most recently programmed speed

(factory default is Low speed) .
The display will indicate LOW TEMP until the actual oven

temperature is within the ready range . When the oven has

reached the programmed temperature, the display will

indicate READY .
At the end of the day, press the On/Off key once to turn the

oven off . The word OFF is displayed for 30 seconds . After 30

seconds the display will go blank . The oven is in the Off Mode .
If the oven is turned off while the internal temperature is

above 200°F, the Auto Cool Down function will begin, (refer to

the following section for details) . After the cavity temperature

has cooled to 150°F, the fan will stop and the display will

indicate OFF as described in the previous paragraph . This

function protects the motor from being left in a heated state,

which could shorten its useful life .

Auto Cool Down And Cool Down

When the On/Off key is placed in the OFF position while the

oven’s internal temperature is at or above 200°F, the control

will automatically enter Cool Down Mode . With the doors

closed, or partially open, the heat will shut off and the fan

will run at high speed until the internal temperature drops

to 150°F . The display will indicate AUTO COOL DOWN . When

the temperature is decreased to 150°F, the control enters Off

Mode .
Cool Down Mode may be manually activated at any time by

pressing the Cool Down key once . This deactivates heating .

The fan will run at high speed and the display will indicate

COOLDOWN .

Содержание moisture+ MP-GD-10-S

















































































Результаты поиска

Содержание moisture+ MP-GD-10-S

Отзывы:

Бренды по названию

Популярные бренды

Garland moisture+ MP-GD-10-S, Руководство по обслуживанию

Результаты поиска

Содержание moisture+ MP-GD-10-S

Отзывы:

Бренды по названию

Популярные бренды