Garland moisture+ MP-ED-10-S, Руководство по обслуживанию

Страница: 19 / 80

Part # MPSM07 (03/24/08) Page 19
High Fan
Pressing this key once will change the fan mode to high
speed . The LED will light as a visual indicator that the fan is
operating at high speed .
Low Fan
Pressing this key once will change the fan mode to low speed .
The LED will light as a visual indicator that the fan is operating
at low speed .
Pulse Fan
Pressing this key once will change the fan mode to pulse . The
LED will light as a visual indicator that the fan is operating in
pulse mode .
In Pulse mode, the fan operates at low speed and is turned
on and off at 30 second intervals after the programmed
temperature is reached .
Note: during pulse mode, the fan will be on continuously
during initial start-up . After the oven has reached the
programmed temperature, the fan will begin to pulse on and
off . While the fan is pulsing, the heat will only be active while
the fan is on . If the temperature probe calls for heat while the
fan is off, the control will not activate the heat output until the
fan turns on . Moisture can not be injected manually during
operation in Pulse Mode .
Cool Down
At any time the oven temperature is above 150°F, the oven
can be cooled by pressing this button . The heat will turn off,
the fan will switch to high speed and the display will change
to indicate that the oven is in Cool Down mode .
When the oven is shut off for the day by pressing the On/Off
key, if the cavity temperature is above 200°F, Cool Down will
automatically start . The fan will run at the high speed setting .
The display will indicate “Auto Cool Down .” This cools the oven
to 150°F to help extend the motor life .
Cook/Hold
Pressing this key activates the Hold feature . At the end
of the cooking cycle, the oven will continue to idle at the
programmed HOLD temperature, holding the oven’s contents
at the desired temperature until serving .
Start/Cancel
Pressing this key begins or ends a cook cycle . When in the idle
mode, pressing the key once will activate the timer to the last
programmed time period . The display timer will count down
the time remaining .
At the end of the cook cycle, an audible alarm will sound .
Pressing this key once will cancel the alarm .
To cancel a cooking cycle in progress, press and hold the key
for three seconds . The timer will stop and the oven will return
to idle mode .
Program
Pressing this key enters the Program Mode . In Program Mode,
various key/display combinations allow the user to program
oven control functions and to input/assign time, temperature
and moisture parameters to recipe keys .
1 . Press and hold the Program key for 3 seconds . The display
will indicate ENTER CODE . Here, a pass code must be
entered . This security feature prevents unauthorized
persons from changing recipe parameters .
2 . Use the number key to enter 4 – 2 – 7 – 5 . Then press the
Y/Enter key .
3 . Press the N/Scroll key to select a recipe or system
programming .
Numeric Keys
Use these keys to enter numeric values when programming
the oven functions and/or recipe keys .
“N”/Scroll
During programming, the user will be required to answer
yes or no to a question asked . This key is used to input a “no”
answer . On other occasions, this key will be used to scroll
through a list of choices .
“Y”/Enter
During programming, the user will be required to answer
yes or no to a question asked . This key is used to input a “yes”
answer . On other occasions, this key will be used to enter a
selection from a list of choices .