Part # 4517125 Rev. 3 (18 May 16)
Page 27
PROGRAMMING
continued
8. Press to return to “PROGRAMMING MODE MENU
ITEMS”
9. Press again to exit.
To Turn Clean Mode On/Off :
1. Press and hold
for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press two, (2) times. “PROGRAMMING MODE SYSTEM
SETUP” is displayed.
5. Press sixteen, (16) times. “CLEAN MODE YES (or NO)” is
displayed.
6. Use and
to turn Clean Mode On or Off .
7. Press to save the changes.
8. Press to return to “PROGRAMMING MODE MENU
ITEMS”
9. Press again to exit.
To Add a Product Name in Library:
1. Press and hold
for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press three, (3) times. “PROGRAMMING MODE PROD
NAME LIB” is displayed.
5. Press . “PROD NAME LIB” is displayed.
6. Press . “PROD NAME LIB” will be displayed on the top
line, with a fl ashing cursor on the bottom line.
7. Use and
to change the character, (A-Z, 1-9,
<space>, and hyphen are available). Use
and
to
move the cursor position.
8. Press to save the new product name. “SAVE LIBRARY
ADD” is displayed.
9. Press to save. “PROGRAMMING MODE PROD NAME
LIB” is displayed.
10. Press
to exit.
To Modify a Product Name in Library:
1. Press and hold
for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press three, (3) times. “PROGRAMMING MODE PROD
NAME LIB” is displayed.
5. Press . “PROD NAME LIB” is displayed.
6. Use and
to select Product Name to be modifi ed.
7. Press . The fi rst character in the Product Name will
start fl ashing.
8. Use and
to change the character, (A-Z, 1-9,
<space>, and hyphen are available). Use
and
to
move the cursor position.
9. Press . “SAVE LIBRARY ADD” is displayed.
10. Press
. “SAVE LIBRARY MODIFY” is displayed.
11. Press
to save. “PROGRAMMING MODE PROD NAME
LIB” is displayed.
12. Press
to exit.
Service Mode
To Change SCK Address:
1. Press and hold
for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press three, (3) times. “PROGRAMMING MODE SERVICE
MODE” is displayed.
5. Press
one, (1), time. “Address XX” is displayed.
6. Use and
to change to the desired SCK Address.
7. Press to save the changes.
8. Press to return to “PROGRAMMING MODE SERVICE
MODE”