Part # 4517125 Rev. 3 (18 May 16)
Page 14
•
Select Clean Mode
When Clean Mode has
been reached, the LED
indicators will turn GREEN.
•
Wipe the Release
Material sheets with a
clean,sanitizer-soaked
grill cloth.
•
Remove the locking clips,
bars, and release sheets.
Wash, rinse, and set aside
to dry.
•
Set release sheets aside
on a fl at surface.
•
Scrape the lower grill
surface with the scraper.
• Use the grill squeegee to
push residual grease into
trough.
• Wash and rinse the
squeegee and scraper.
CLEANING AND MAINTENANCE
continued
04
03
01
01
02
05
07
08
•
Remove the grease trough
from each side. Empty and
replace.
•
Apply the grill cleaner
to front side of platens
starting from right platen
to left platen.
• DO NOT SCRUB.
•
Apply the grill cleaner to
platen surfaces starting
from right platen to left
platen.
• DO NOT SCRUB
•
Apply the grill cleaner to
back side of platens from
right platen to left platen.
• DO NOT SCRUB
06
09
•
Apply the grill cleaner to
outer edges of right and
left platens.
• DO NOT SCRUB
• Press green & black
buttons to lower the
center platen.
•
Apply grill cleaner to
inner edges of the right
and left platens, and
the edges of the center
platen.
• DO NOT SCRUB
• Press green button to
raise center platen..
•
Apply grill cleaner to
bottom grill surface.
• Spread the cleaner over
the entire lower grill
surface from front to back
using even strokes.
• DO NOT SCRUB
•
Rinse platen surfaces with
a clean, sanitizer-soaked
grill cloth, starting from
right to left platens.
• Press green & black
buttons to lower the
center platen.
10
11
12