QUICK START GUIDE
Breakout Network TAP | M1GCCB
LED Labeling
When in the Synchronization Mode the SP LEDs will show you what speed has been synchronized for the
link. Below is a diagram and chart showing the LED operations.
SP (Speed):
When in Sync Mode only, indicates the highest established common speed across all ports
of a tap. LED s indicate the following established speeds: [1st SP 1G] – [2nd SP 100M] – [3rd SP 10M] –
[4th SP Negotiating]
LNK (Link/Activity):
Solid when link is achieved and flashes when Ethernet activity is detected on a
particular interface.
For questions, please contact Garland Technology Support at:
8AM-9PM (CST) Monday - Friday (Except for observed US Holidays)
Tel: 716.242.8500 Online: www.garlandtechnology.com/support
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
4
