User Guide
EdgeLens | INT10G8XX56-SP | 4.29.2
Source MAC Address / Source MAC Mask
Destination MAC Address / Destination MAC Mask
Ether Type
Source IPv4 Address / Source IP Mask
Destination IPv4 Address / Destination IP Mask
Source IPv6 Address / Source IP Mask
Destination IPv6 Address / Destination IP Mask
Inner VLAN ID
Outer VLAN ID
DSCP
IP Protocol
L4 Source Port or Range
L4 Destination Port or Range
7. Select Save Template.
The new filter template will appear on the Filter Templates panel.
8. Select Cancel to disregard changes and return to the Filter Templates panel.
9. Select the template name to modify the template.
10. Select the red X to delete the template.
Load Balancing Group
Load balancing groups are used as an egress option on config maps. The traffic applied to the ports
assigned to a load balancing group will follow the hashing per the load balancing policy. Ports may be
added or removed from load balancing groups as desired. However, if ports are added or removed from
a load balancing group that is used in a config map, the config map load balancing group will be also
modified, the reverse is also applied. Previously created load balancing groups will be displayed on the
Create Config Map panel.
1. Select Load Balancing Groups.
The Load Balancing Groups panel will be displayed.
2. Select Create Group.
The Create New Load Balance Group panel will be displayed.
3. Enter the name. If no name is entered the system will automatically apply a name as follows,
lbg, lbg(2), lbg(3), etc.
4. Enter the description, optional.
5. Add ports by placing the cursor on the desired port. Press the left mouse button. Drag the port to
the New L.B. Group panel and release. Repeat for all desired ports. Ports may be added in any
combination.
6. Remove a port by placing the cursor on the port in the New L.B. Group panel and double press the left
mouse button.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.
29