User Guide
EdgeLens | INT10G8XX56-SP | 4.29.2
1. Select Tunnels.
The Tunnels panel will be displayed.
2. Select Create Tunnel.
The Create Tunnels panel will be displayed.
3. Add an ingress port by placing the cursor on the desired port. Press the left mouse button. Drag
the port to the Ingress panel and release.
4. Add an egress port by placing the cursor on the desired port. Press the left mouse button. Drag
the port to the Egress panel and release.
5. Select Configure.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2023 Garland Technology, LLC. All rights reserved.
25