Garland INDIANA 14, Инструкция по эксплуатации

Страница: 40 / 172

English
40/172
The warning labels which figure below accompany
the important information about the product or the
instructions for use.
4. MACHINE SYMBOLS
To ensure safe operating and maintenance, the
symbols are embossed on the tool.
Positions of the ignition switch. Located on the left
side of the machine.
Chain oil flow adjustment:
3. WARNING SYMBOLS
Warning and caution. The warning labels
which figure below accompany the
important information about the product
or the instructions
for use.
This mark indicates instructions that
must be followed to prevent mechanical
problems, broken or damaged.
You must read this manual carefully
before using this machine.
Use eye and ear protection at all times.
Use this tool with both hands.
Danger of kickback.
Fuel tank. Located on the tank cap.
MIX 2.5% (PETROL 40: OIL 1).
Chain oil tank. Located on the tank cap.
Ignition off (the tool will not operate)
Choke lever positions::
Pull the Choke to close the air passage.
Push the Choke to open the airway.
Located on the right side of the machine.
Chain oil flow adjustment.
“H” = High revolution adjustment screw.
“L”= Low revolution adjustment screw.
“T” = Idle adjust nut.
Chain brake position.
White Arrow = Brake not activated
(Normal operating position)
Black Arrow = Brake activated
Direction of installing the cutting chain
Indicator.
¡Never use only petrol or petrol in a bad
condition!. Use new lead free 95º petrol and
100% synthetic oil for two stroke engines.
Engine fuel: mix (petrol 40: oil 1) 2,5%.
Complies with CE directives.