Garland GAS 339 E, Инструкция по эксплуатации

Страница: 34 / 124

English
34/120
Do not use this machine if you are tired, sick, are taking
medicines, or if under the effect of alcohol or drugs.
The lack of rest and fatigue can cause accidents and
damages.
Do not expose this machine to rain and wet and
humid conditions. If water enters the machine there
will be a higher risk of electric shock.
Do not rely solely on the security elements of the
machine.
It is important to check that all parts are well
tightened. If you detect any anomaly, stop the machine
straight away and check the machine carefully. In
case of any damage, take the machine to your nearest
service agent. Never carrying on working if the
machine is not working correctly.
Remember to always use the machine with clean
hands and without petrol and oil.
Clean the working area and remove any obstacles
that could cause accidents. Check the workplace and
remove all elements that could be at risk of being
propelled from the workplace towards other people.
Do not allow anybody to enter the working area.
This working perimeter is 15 metres and this is a
dangerous zone.
Never use the machine when on top of a ladder, in a
tree or in any other unstable surface.
When moving from one working area to the next, turn
off the engine.
Never let the machine unattended.
Do not use any accessories that are not originals and
that have not been recommended by the manufacturer.
Use of other accessories can cause accidents and can
be dangerous for the end user and those nearby as well
as causing damages to the machine.
Always follow the security rules that we indicate in the
manual.
7.1. HOW TO HOLD THE MACHINE AND GUIDE IT
WHILST WORKING
Whilst working, always place yourself behind the
machine and hold it firmly with both hands on the
handles.
7.2. SPEED REGULATION
This machine has a speed regulator with
which you can control the speed of the
blowing air and that of the vacuum air.
To regulate the speed turn the regulator right or left
depending on whether you want more or less speed.
7.3. WORKING WITH THE BLOWING FUNCTION
Always follow the security stipulations that we indicate
in the manual.
Start the machine with the machine on the ground,
place it on your back and aim the air flow towards
the leaves and materials to be pushed. Push all the
material towards one place which preferably should
be a corner.
Once all the material has been grouped for pick up,
turn the machine off, switch to vacuum function, start
the machine again and begins to suck the materials.
7.4. WORKING WITH THE VACUUM
Always follow the security stipulations that we indicate
in the manual.
1 6