Garland GAS 339 E, Инструкция по эксплуатации

Страница: 35 / 124

English English
35/120
Start the vacuum and vacuum the material.
When you feel the catcher is full, stop the machine,
unplug the machine from the mains, disconnect the
catcher and empty it.
Once the catcher is empty, connect again before
starting to work again.
7.5. AFTER USAGE
Once you stop using the machine.
1. Disconnect the machine releasing the switch
(¨O¨ closed position).
2. Disconnect the machine from the mains.
3. Clean any residues from the catcher and the tubes.
8. MAINTENANCE AND SERVICE
Carry out random inspections on the machine to
ensure an efficient use of the machine. For a
complete maintenance take the machine to your
nearest service agent.
Never attempt to carry out any maintenance work
on the machine if the machine is running. Carry out
all maintenance work on a flat surface and on a clear
surface.
Always carry out all the maintenance work with
the machine unplugged from the mains.
Read the instruction manual before carrying out
any maintenance work.
Maintain the machine clean, specially the ventilating
areas of the engine.
Only use original spare parts and accessories for this
machine so as to obtain the best performance from
the machine. These spare parts and accessories can
be found in the official distributors of the brand. The
use of other spare parts and accessories could result
in risks to the end user, people who are nearby and to
the machine.
The removal of the security elements, a poor
maintenance or the substitution of spares and
accessories by non original ones can all cause severe
corporal damages.
8.1. MAINTENANCE AFTER USAGE
Carry out the following maintenance work once
you finish your task to guarantee that the machine
functions correctly next time.
8.1.1. GENERAL CHECKS
Check the cable and ensure that the cable has neither
worn off or has been cut.
8.1.2. CLEANING
Before carrying out any cleaning work, unplug the
machine.
Attention! Always clean the machine after use.
Not cleaning the machine adequately will result
in damages to the machine and the machine will
work less. Wherever possible, clean the machine
immediately after working with it.
Do not clean the engine with water. The electric
engine could stop functioning.
Clean the covers of the machine with a damp cloth.
Do not use petrol, detergents, water or any other liquid
to clean the machine.