Garland GAS 301 E, Инструкция по эксплуатации

Страница: 24 / 112

English
24/112
the machine hanging from the handle keeping the
machine always high so it does not touch the ground
The substitution of the plug or cable should only be
carried out by your service dealer.
We recommend that this machine should be
connected to residual differential whose current is
lower or equal to 30mA. The cable extension should
always be behind the end user.
Never use a connecting base that is damaged or that
does not comply with current normative or with the
requisites established for this machine in this manual.
When using a cable extension, make sure that its
minimum section is 1.5mm2 and no longer than 25
metres, always unrolled and adequate for outdoor use.
The use of the cable extension adequate for outdoor
use, reduces the risk of electric shock.
Place the cable extension in such a way that it will not
get caught in branches or other obstacles and in such
a way that it is not in the working area. The cable and
any extensions must always be behind the machine
and the end user.
Always hold the cable on the hook supplied with the
machine.
Do not use this machine if the ¨open¨ and ¨closed¨
switch does not work. Any electric machine that
cannot be controlled by the electric switch is
dangerous and must be repaired.
Always disconnect the machine from the mains before
carrying out any maintenance work on the pump. Only
manipulate the machine when the machine has been
unplugged.
2.5. USE AND CARE OF THE MACHINE
Use this machine, accessories and all its parts
according to the instruction manual and taking into
account working conditions and working area. The use
of this machine for jobs different to those specified
in the instruction manual can cause dangerous
situations.
Check that all security elements are in good working
order at all times.
Remember user is the responsible of danger and
accidents caused to other people or things. The
manufacturer will not be liable for damages caused
through the incorrect usage of the machine.
Do not overload the machine. Use the machine for its
correct usage. If used correctly the machine will do
the desired job.
Do not use this machine if the ¨open¨ and ¨closed¨
switch does not work. Any electric machine that
cannot be controlled by the electric switch is
dangerous and must be repaired.
Look after the machine. Check that all moving parts
are well aligned and that they are not blocked, that
there are no broken pieces or other conditions that
could affect the proper functioning of the machine.
If this machine is damaged, always repair it before
using it again. Most accidents occur because of poor
maintenance.
If the machine vacuums a strange element whilst
working, stop the machine, disconnect the machine
from the mains and examine the machine before
continuing. If you detect any type of damage. Take the
machine to your nearest after sales agent.
Maintain the handles of the machine dry and clean.