USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 35 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.7 Two port link (2PL)
The M40GBP supports two ports link. When enabled (on), if one of the network ports link fails it drops
the link on the other network port. Two ports link is disabled (off) by default.
Example:
6.8 Monitor ports two port link (M2M)
M2M (monitor ports two port link) When enabled (on), if one of the monitor ports link fails it drops the
link on the other monitor port. M2M k is disabled (off) by default.
M40GBP$get_2pl
two port link: off.
command succeeded.
M40GBP$set_2pl on
command succeeded.
M40GBP$get_2pl
two port link: on.
command succeeded.
M40GBP$set_2pl off
command succeeded.
M40GBP$get_2pl
two port link: off.
command succeeded.
M40GBP$
M40GBP$get_m2m
m2m: off.
command succeeded.
M40GBP$ set_m2m on
command succeeded.
M40GBP$ get_m2m
m2m: on.
command succeeded.
M40GBP$