USER GUIDE
EdgeLens Focus | INT10G12xxBP
Monitor Ports -
Monitor ports may be added to the tap. The tap may have up to two monitor ports per network port, total of four
monitor ports. The monitor ports may be added to monitor the traffic on one or both network ports, to monitor the
ingress or egress.
Create a monitor port by placing the cursor on the desired port above the tap. Press the left mouse button and
hold to select the port. Drag the port to the desired network port. The default of any monitor port is ingress.
Change the monitor port traffic by placing the cursor on the ingress panel and press the left mouse button.
Additional monitor ports may be added using the same procedure.
Save
- select to change the tap to the new settings. After selecting
save the tap display will appear. Save must be selected
on tap display for the new tap settings to be saved
Cancel
- select to disregard tap changes or keep original settings
and return to the tap display
Garland Technology | 716.242.8500 |
Copyright © 2020 Garland Technology, LLC. All rights reserved.
17