Garland CL 3500-555, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 44

Part Number 4532879 1/15 23
Section 2 Installation
Glass Installation Guidelines and Instructions
GLASS ISTALLATIO GUIDELIES
• The glass-top should be installed first before installing
the compact-line induction module.
• To allow the temperature sensors to work properly,
the induction module is to be compressed against the
underside of the glass-top after installation. See section
“Critical Dimension for Compression” on page 19
• The glass-top should be installed flush with the counter-
top and bonded using silicone sealant (included in the
Air Intake Kit).
• The glass-top must not be adhered to the support
surface directly. Silicone gasket is provided for glass
installation. See procedure in “Glass Installation
Instructions” on page 24
• NOTE: Final installed thickness:
Thickness of glass + silicone silicone seal =
6mm + 3mm + approx. 0.5mm = total approx. 9.5mm.
• The glass perimeter should be sealed with silicone to
prevent penetration of any liquid into the interior. For
a typical installation, we recommend to leave a gap of
4.0mm / 0.16” between the glass and the counter-top to
be filled with silicone.
• To match the edged pattern on the glass and the
centers of the induction coils, the glass-top should only
be oriented in one direction as shown:
COUTERTOP CUT-OUT DIMESIOS
Dual Model (2-Cooktops)
Dual Model (2-Cooktops)
Unit Length
(mm)
Glass Size mm
(inch)
Cut-Out Size*
mm (inch)
555
300 x 600
(11.81 x 23.62)
308 x 608
(12.13 x 23.94)
610 375 x 650
(14.76 x 25.6)
383 x 658
(15.08 x 25.91)
650
360 x 720
(14.17 x 28.35)
368 x 728
(14.49 x 28.66)
*Added 4mm width for silicone sealant on each side.
Quad Model (4-Cooktops)
Quad Model (4-Cooktops)
Unit Length
(mm)
Glass Size mm
(inch)
Cut-Out Size*
mm (inch)
555
600 x 600
(23.62 x 23.62)
608 x 608
(23.94 x 23.94)
610 650 x 650
(25.60 x 25.60)
658 x 658
(25.91 x 25.91)
650
720 x 720
(28.35 x 28.35)
728 x 728
(28.66 x 28.66)
*Added 4mm width for silicone sealant on each side.