Garland CL 3500-555, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 44

Part Number 4532879 1/15 19
Section 2 Installation
CRITICAL DIMESIO FOR COMPRESSIO
The RTCSmp sensors (“E”, illustration below) monitor the
cook-zone temperature constantly to ensure an accurate
and safe operating temperature. For the sensors to function
properly, they have to be compressed against the glass-top
constantly and evenly. The springs “D” supporting the coils
and sensors will allow this compression to occur during
installation.
otice
Critical Dimension
After installation, the distance from the guard rail to the
glass,
40+/-1mm
, must be obtained to get the correct
compression.
164.8mm
A
B
C
(i)
(ii)
E
D
161 +/-1mm
40 +/-1mm
(mounting frame for the compact line generator not shown)
A. Counter-top
B. Custom-built frame to
mount the glass-top
C. Glass cook-top
D. Compression Springs
inside the unit. The
springs support the
coils and the sensors.
E. RTCSmp Sensors
(i)
The glass-top has to be fixed
onto the counter-top first
before installing the induction
generator. See section
“Glass
Installation Guidelines and
Instructions” on page 23
(ii)
To ensure proper contact with
the glass-top, the sensors and
coils must be compressed
evenly.