Garland CHIPPER 790 QG, Инструкция по эксплуатации

Страница: 43 / 148

English English
43/148
8.4.1. AIR FILTER
The dirt in the air cleaner will cause a reduction in the
performance of the machine. Check and clean this
element. If you notice damage or alterations to the
filter, replace it with a new one.
The foam filter can be cleaned in the following way:
- Remove the protective cap from the filter.
- Remove the filter.
- Clean the filter with soapy water.
- Rinse the filter with clean water.
- Dry the filter.
- Once dry, moisten it with 2 drops of oil (if you wet
the filter with too much oil the machine cannot
start).
- Install the filter on the machine.
- Put on the protective cap.
Note: The engine should never function without
the air filter installed.
8.4.2. CHANGING THE ENGINE OIL
Perform the oil change only while the engine is still
hot.
PIECES ACTION
Each use
First month /
20 hours
First 3 months/
50 hours
First 8 months /
100 hours
Each year/
300 hours
Engine oil
Level test •
Change • •
Air fi lter
Check •
Cleaning •
Replace
Tension transmission belt Cleaning and adjustment • •
Spark plug
Adjustment •
Replace •
Muffler Cleaning •
Fuel sediment deposits Cleaning •
Filter and fuel tank Cleaning •
Fuel inlet tube Check and replace if necessary •