Garland BG 50, Инструкция по эксплуатации

Страница: 29 / 36

English
28/38
English
29/38
- When storing engine for more than 30 days:
a. Store in a dry and clean area.
b. Run engine until fuel tank is empty and engine
stops or add gasoline preservative and running
engine after adding for several minutes to circulate
preservative.
- Change engine lubrication oil if necessary.
- Clean exterior surfaces of the engine.
- Remove the spark plug, pour a small spoonful
of four stroke oil on the cylinder. Reinstall the spark
plug without connecting the spark plug pipe. Pull
the starting rope several times so as to distribute
the oil on all the engine.
- Pull slowly the starting rope until you feel some
resistance and stop pulling. In this point, the valves
are closed and this will avoid the entry of dust and
oxide to the cylinder.
- Cover the engine well to protect it from the dust.
- If the machine turns usefulness someday or are no
longer needed, it should be discarded under any
circumstances, household waste, but recycled
organically.
- The machine must be delivered to authorized
recycling point. The pieces of plastic and metal can
thus be separated there and reused in the
production chain.
Information on recycling can be obtained from the
administrations of the respective communities or
neighbourhoods.
- Used oil is a hazardous waste product. It is
suggested to bring used oil to your local recycling
centre with properly sealed container a sealed
container to your local recycling centre. DO not
discard with household waste.
TRANSPORT AND STORAGE
ENVIRONMENTAL PROTECTION
ATTENTION!
PETROL IS A FLAMMABLE PRODUCT. PETROL OR
PETROL FUMES CAN EXPLODE. MAINTAIN POSSIBLE
FLAMES AND SPARKS WELL AWAY FROM THE
WORKING AREA.
ATTENTION!
WHEN DOING ANY SERVICE WORK ON THE ENGINE,
EXAMINE THE BLADE AND/OR CLEAN THE BOTTOM
PART OF THE CARTER. ENSURE TO MOVE THE
ENGINE WITH THE SPARK PLUG LOOKING UPWARDS.
THE TRANSPORT OR THE OVERTURNING OF THE
ENGINE WITH THE SPARK PLUG LOOKING DOWN
CAN CAUSE:
EXCESSIVE SMOKE OF THE ENGINE.
STARTING THE MACHINE WILL BE DIFFICULT.
BREAKAGE OF THE SPARK PLUG.
ATTENTION!
THE SATURATION OF THE AIR FILTER WITH OIL OR
PETROL.