GARIN System
10
▶ R/S reserve Mode (Manual Transmission only)
- Vehicle Status : Engine-ON, Gear N-position, Hand brake engaged.
- Turbo Timer ON : Door open
Press Start/Stop Button
ACC OFF while engine is still ON
- R/S Reserve Mode : while Turbo timer mode
leave the car engine off (90seconds) or Smart Stopping(15mins)
Reserve Mode SET
※ While Turbo Timer or Smart Stopping, can turn off the Engine by Remote as press
for 2 seconds
R/S Reserve mode.
※ If Turbo Timer function is SET-OFF, Driver MUST turn off the engine by pressing
of Remote FOB after engaged R/S Reserve mode.
▶ Auto-Door Function (Automatic Door unlock / Lock by approaching, walk away)
while Driver posses Remote FOB,
- When driver approaches to vehicle, doors will be unlocked automatically, when driver walk away from vehicle, doors will be locked.
- Working only when vehicle equipped LF transmitter and while
armed mode / remote engine started/ turbo timer mode /smart stopping mode.
- If driver not come to the vehicle for 48hours, Auto door function will be deactivated for anti-battery drain.
In this case, unlock door by Remote FOB, then auto door function will be activated.
- When shut vehicle door, it will be locked within 10seconds,
if Remote FOB is recognized within 2meters from LF transmitter, doors will be remained as unlocked.
▶ Auto-Start Function (from low battery voltage detect)
- Function that MYKEY system detects vehicle battery voltage is low from set-default then MYKEY system start engine for battery recharging.
- Once Auto-Start Function is activated, it keeps for 15mins, trying upto 5 times maximum due to fuel issue.
- If auto start performed, MYKEY module notice to driver by buzzer when driver gets in the car. (Buzzer numbers = Auto start trying numbers)
▶ Emergency Engine Start after pin code input(in case of broken, drained FOB battery)
① Enter to car by blade Key of Remote FOB, Press START/STOP button for 10seconds. LED blinks & Buzzer 2times. (Ready to get pin number)
② Press 1
st
pin number (pressing times is pin number), if input LED blinks & Buzzer 2 times.
③ Do the same until 4
th
pin number. Then wait 2 seconds.
④ Check LED blink & Buzzer 2 times.
⑤ Now Press foot brake, if pin number is correct, instrument panel Lighting ON (KEY-ON)
Press START/STOP Button for Engine Start.
※ If not valid pin code, please try again to put pin numbers from beginning.
MYKEY Classic main Functions 1-1
