GARIA VIA, Руководство пользователя, Страница: 39 / 119

03
BATTERIES
26
STEP 4
Fill water to batteries.
Squeeze the bulb with firm pressure to
begin pumping water into the battery cells.
When the bulb becomes firm, all cells are
full and filling is complete.
STEP 5
Disconnect
When the bulb becomes firm, and not be-
fore, immediately disconnect the couplers
by depressing the push button on the
female coupler. Disconnecting before
the bulb becomes firm will lead to under
-
filled cells that will impact the battery’s
performance and shorten its life.
STEP 6
Replace dust cover
Place dust cover back over the male cou
-
pler. Do not push cover past the large barb
on the coupler.
TIP: If the dust cover is slightly squeezed
when sliding it over the coupler, it will
create a vacuum, allowing it to hold tightly.
Fig. 3.5
Fig. 3.6
Fig. 3.7
Button