Note:
Make sure that both right and left wheels are located in the same cutting height adjustment
position.
.
2. Cutting height positions (fig.2b)
1)30mm (lowest cutting height position)
2)45mm
3)60mm (highest cutting height position)
Fig.2b
VI-Operating
Connect to power supply
Warning!
Before connecting to the mains supply, always check the switch is in off position. Connect
the plug into the RCD protected power supply.
Starting
On/Off switch( fig.3)
Caution! Do not start the mower if it is standing in long grass. Press the safety button (A) of the switch
assembly and then pull the switch lever (B) against the bar. Keep the switch lever held whilst
releasing the safety button. To stop the mower release the switch lever and it automatically returns to
its off position.
Mowing (
fig.4)
We recommend to use your mower as outlined in this section in order to achieve optimum results
and to reduce the risk of cutting the mains cable.
l
Place the bulk of the mains cable on the close to the starting point.
l
Switch the mower on as described above.
l
Proceed as shown in fig.4
l
Move from position 1 to position 2
l
Turn right and proceed towards position 3
l
Turn left and move towards position 4
l
Repeat the above procedures as required.
3
