Fig.1f
6) Lift the flap and place the grass box over the lugs.(fig.1g)
Fig.1g
CUTTING HEIGHT ADJUSTMENT
To obtain the desired cutting height, the front and rear axles are repositioned on the underside of the
mower housing.
Warning!
Disconnect the mower from the power supply and ensure the blade has stopped
coasting before adjusting the height.
1. To adjust the wheel cutting height position (fig. 2a)
1) Turn the mower upside down.
2) Pull the wheel axle towards the front of the mower.
3) Locate the wheel axle into the desired cutting height adjustment position.
Fig.2a
