background image

 

VENT MODE

 

 

  

Note: the gauge will not display atmospheric pressure. 

 

 

 

The pump will automatically go into vent mode when the pump is turned on. 

 

 

 

VENT Mode is the central mode to allow the user to enter MENU, AUTO, MANUAL 

 

 

 

and MAXIMUM VACUUM modes. VENT mode allows the user to quickly remove the 

 

 

 

vacuum setting on an application and vent the system.

 

 

 

All programs are quickly accessible in VENT mode by pressing the numeric keypad for each 

 

 

 

program number.

 

 

 

Example:

 

 

 

 

 

Keypad # 

 

 

 

Program #

     

 

 

 

 

 

0        

 

 

Repeat Previous Setting

 

 

 

 

 

 

1  

 

 

 

 

1

 

 

 

 

 

 

2  

 

 

 

 

2

 

 

 

 

 

 

3  

 

 

 

 

 

 

 

 

 

 

4  

 

 

 

 

4

 

 

 

 

 

 

5  

 

 

 

 

 

 

 

Note:   Press the ENTER button to run the selected program

 

MANUAL MODE

 

 

 

Press MANUAL  button to enter MANUAL  mode

 

 

 

MANUAL mode gives you full control of the vacuum setting by manually opening/closing the 

 

 

 

variable valve with each turn of the Vacuum Control knob. The linear bar graph displays the valve

  

 

 

position.  Push the Vacuum Control knob to lock in your desired vacuum setting and switch  to 

 

 

 

AUTO mode. AUTO mode will display the exact vacuum setting and allow you to use all AUTO 

 

 

 

mode functions.

 

 

 

Note:   MANUAL mode defaults to the valve open (vent) position when pressed except when in 

 

 

 

 

MAXIMUM VACUUM mode where the valve will be in the closed (max vac) position.

 

AUTO MODE

 

 

 

Press AUTO button  or Vacuum Control knob in MANUAL mode to enter AUTO mode

 

 

 

AUTO mode gives you precise control of the vacuum setting via Up/Down arrows, Numeric 

 

 

 

Keypad and the Vacuum Control knob. The bottom right of the display shows the set vacuum 

 

 

 

setting.  The initial vacuum setting must be set via the numeric key pad and enter button. Once 

 

 

 

the initial value has been entered the Up/Down arrows, Numeric Keypad and the Vacuum Control

 

 

  

knob will all allow precise vacuum control in AUTO mode. The only exception is when the users 

 

 

 

switches from MANUAL mode to AUTO by pushing the Vacuum Control knob 

 

 

 

(see MANUAL mode). 

 

MAXIMUM VACUUM MODE

 

 

 

Press MAXIMUM VACUUM button to enter MAXIMUM VACUUM mode

 

 

 

MAXIMUM VACUUM mode closes the valve and sets the pump to the maximum vacuum level. 

 

 

 

To adjust the vacuum level in MAXIMUM VACUUM mode you can press the MANUAL mode 

 

 

 

button and use Vacuum Control knob to open/close the variable valve (see manual mode) or press 

 

 

 

the Anti-BUMPING/FOAMING button to decrease the vacuum level by several torr. 

 

 

 

Note:   Selecting MANUAL mode while in MAXIMUM VACUUM sets the unit in MANUAL 

 

 

 

 

mode with the valve in the closed (maximum vacuum) position.

12

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание Welch Self-Cleaning Dry Vacuum System DryFast...































Отзывы: