H4960700 Date 20.11.08 Issue 002
26
HYDRAULIC OIL LEVEL
The reservoir oil level is visible through a sight gauge. The oil level is correct when it is
on the maximum limit, with the stabiliser legs and booms stowed and the vehicle on level
ground.
DRAINING AND RE-FILLING THE HYDRAULIC SYSTEM
Note:
Return-line Multi-flow Filter (mounted on top of oil reservoir)
The disposable cartridge element of the filter will require renewal every 2000
hours or every year of operation unless the visual indicator shows otherwise.
Before draining and refilling the system, check the indictor with the hydraulic oil at
its normal operating temperature and the PTO unit engaged. If the indicator
needle enters the red zone on the scale, change the element as indicated during
the following procedure.
Carry out the following sequence of operations:
DRAIN SYSTEM
1.
Place a container (or containers) with a total capacity of 70 litres (15 gallons)
beneath the vehicle and provide a funnel and hose to collect the oil from the
reservoir.
2.
Open the drain valve (fitted either beneath or on the offside front of the
reservoir) and allow the oil to drain away.
3.
Remove and drain the pump suction hose.
CLEAN SUCTION STRAINER
1.
Remove the tank lid assembly from hydraulic reservoir.
2.
Remove, clean and dry the strainer.
CHANGE MULTI-FLOW FILTER ELEMENT
(if necessary – see note above)
1.
Disconnect the flexible hose from the filter and direct it into a container.
2. Remove
the
filter
cap.
3.
Lift the cartridge element out of the filter body.
4.
Detach the bayonet fitting and down-pipe assembly from the cartridge.
Clean and dry it and fit it to the new cartridge.
5.
Thoroughly clean and dry the filter body and cap.
DO NOT FIT THE CARTRIDGE INTO THE FILTER UNTIL THE RESERVOIR HAS
BEEN CLEANED. RECONNECT THE FLEXIBLE HOSE WHEN INDICATED DURING
THE PRIMING PROCEDURE.
Содержание VM 135
