Gardner Denver VM 135, Руководство по эксплуатации, безопасности и техническому обслуживанию

Страница: 22 / 46

H4960700 Date 20.11.08 Issue 002
22
Before stowing the machine ensure that the areas where personnel could be crushed
are clear – boom rest, cage rail, rear of vehicle, etc.
The D.C power button in the basket activates the battery operated power pack. This is
for use when the vehicle engine will not run, such as when the fuel has run out. Vehicle
electrical power must still be present for the power pack and platform controls to operate.
The vehicle engine will stop if this button is pressed while the engine is running.
To stow the platform using D.C power, press and hold the D.C power button, then
operate the platform controls as normal. Fully retract the telescopic boom, slew the
platform into alignment with the pointer on the slew guard / A-Frame, fully lower the
base, fully lower the middle boom.
D.C power is also available on the ground control pendant: Turn the key switch on the
control panel to Ground Controls. Turn the D.C power switch on the pendant to ON (this
will stop the engine if it is running). Pushing any of the boom function buttons on the
pendant will activate the power pack to drive the boom or slew movements, assuming
the stabiliser legs are correctly deployed.
Note:- the system is self interlocking. The stabilisers cannot be raised until the booms
are stowed.
To raise the stabilisers using back-up power, open the main electrical panel, throw the
rocker switch in the panel, and turn the DC power switch on the ground control pendant
to ON. The DC power pack will now be running and the legs can be raised using the
control valve. There may be a delay while the power pack pressurises the system.
When the non-stowed indicator lights are out, disengage the PTO.
When the PTO light is out the vehicle can be driven away.
NOTE:- if the booms or stabilisers are not stowed, or the PTO is not disengaged when
the handbrake is released, a buzzer will sound and a warning light will illuminate.
Prolonged use of the power pack will flatten the vehicle battery.