background image

 EN-4                                                                                                                                                                                                               HYD-7-610

EN

DANGER

Indicates an imminently hazardous 

situation which, if not avoided, will result 

in death or serious injury.

WARNING

Indicates a potentially hazardous situation 

which, if not avoided, could result in death 

or serious injury.

CAUTION

Indicates a potentially hazardous situation 

which, if not avoided, may result in minor 

or moderate injury or property damage.

NOTICE

Indicates information or a company 

policy that relates directly or indirectly to 

the safety of personnel or protection of 

property.

 

„

GENERAL SAFETY PRECAUTIONS 

DANGER

Intake air can contain carbon monoxide or other contaminants. 

Will cause serious injury or death. Gardner Denver air 

compressors are not designed, intended or approved for 

breathing air. Compressed air should not be used for breathing 

air applications unless treated in accordance with all applicable 

codes and regulations.

WARNING

Moving parts. Can cause serious injury. Do not operate with 

guards removed. 

Hot surfaces. Can cause serious injury. Do not touch. Allow to 

cool before servicing. Do not touch hot compressor or tubing.

High pressure air. Bypassing, modifying or removing safety/relief 

valves can cause serious injury or death. Do not bypass, modify 

or remove safety/relief valves. Do not direct air stream at body. 

CAUTION

A caution risk of bursting. Use only suitable air handling parts 

acceptable for pressure of not less than the maximum allowable 

working pressure of the machine.

SAFETY

GENERAL INFORMATION

Your air compressor is suitable for the Transport Market used to assist with 

liquid bulk tanker offload. The following accessories may be required:

 • Relief valve
 •  Check valve
 • Hot pressure hose
 •  3-way ball valve
 • Pressure gauge.

Содержание GD 70





















Отзывы: