Gardner Denver Elmo Rietschle V-KTR 100, Руководство по эксплуатации

Страница: 26 / 32

26 |
www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
Malfunctions: Causes and elimination
Fault Cause Troubleshooting Important
Machine is switched
off by the motor pro-
tection switch Mains voltage/ Frequency
does not correspond with the
motor data Check by qualifi ed electrician Section 5.5
Connection to motor terminal
board is not correct
Motor protection switch is not
set correctly
Motor protection switch is
triggered too quickly Use a motor protection switch
with an overload-dependent
delayed switch off that takes
into consideration the short
term excess current at start
up (version with short circuit
and overload trigger as per
VDE 0660 Part 2 orIEC 947-4)
The blow out fi lter cartridge
(accessory) is dirty. Clean or replace the fi lter
cartridges Section 7.2.3
Section 7.4
The regulating valves are dirty
so that the permissible vacu-
um value is exceeded. Clean or replace the regulat-
ing valves Section 7.2
Section 7.4
Blowing capacity is
insuffi cient Intake fi lter and/or blow out
fi lter are dirty Clean or replace the intake
fi lter Section 7.2.3
Section 7.4
The pressure line is too long
or too narrow Check the hose or the pipe Section 5.3
Machine or system leaking Check the pipework and
screw connections for leaks
and to ensure that they are
fi rmly seated. Section 7.2
Discs are damaged Replace discs Section 7.2.2
Section 7.4
8 Malfunctions: Causes and elimination