SB--7--627 Page i
MAINTAIN BLOWER RELIABILITY AND PERFORMANCE
WITH GENUINE GARDNER DENVER
PARTS AND SUPPORT SERVICES
Factory genuine parts, manufactured to design
tolerances, are developed for optimum dependability
------ specifically for your blower. Design and material
innovations are born from years of experience with
hundreds of different blower applications. When you
specify factory genuine parts you are assured of receiv-
ing parts that incorporate the most current design
advancements . . . manufactured in our state--of--the--
art blower factory under exacting quality standards.
Your
AUTHORIZED DISTRIBUTOR
offers all the
backup you require. A worldwide network of authorized
distributors provides the finest product support in the
blower industry.
Your
AUTHORIZED DISTRIBUTOR
can support your
blower investment with these services:
1. Trained parts technical representatives to assist
you in selecting the correct replacement parts.
2. Complete inventory of new machines and new,
genuine factory parts.
3. A full line of factory tested AEON
t
PD blower
lubricants specifically formulated for optimum
performance in all blowers.
4. Authorized Distributor service technicians are
factory-trained and skilled in blower maintenance
and repair. They are ready to respond and assist
you by providing fast, expert maintenance and
repair services.
INSTRUCTIONS FOR DETERMINING BLOWER CONFIGURATION
1. Face the blower drive shaft.
2. In a
VERTICAL
configuration, air flow is horizontal.
3. In a
HORIZONTAL
configuration, air flow is vertical.
4. In a vertical configuration, a
BOTTOM HAND
exists when the drive shaft is below the horizontal
center line of the blower. A
TOP HAND
exists
when the drive shaft is above the horizontal center
line of the blower.
5. In a horizontal configuration, a
RIGHT HAND
exists when the drive shaft is to the right of the
vertical center line of the blower. A
LEFT HAND
exists when the drive shaft is to the left of the
vertical center line of the blower.
INSTRUCTIONS FOR ORDERING REPAIR PARTS
For pricing and ordering information, contact your nearest AUTHORIZED FACTORY DISTRIBUTOR.
When ordering parts, specify Blower
MODEL
and
SERIAL NUMBER
(see nameplate on unit).
Rely upon the knowledge and experience of your AUTHORIZED DISTRIBUTOR and let them assist you in making
the proper parts selection for your blower.
For the location of your local authorized Gardner Denver Blower distributor refer to the yellow pages of your
phone directory, check the Web site at www.gardnerdenver.com or contact:
Gardner Denver Compressor Division
1800 Gardner Expressway
Quincy, IL 62305
Phone: (217) 222--5400
Fax:
(217) 221--8780
2
4400 Morris Park Drive
Web:
www.suncopowder.com
Charlotte, NC 28227
E
mail:
Phone: (704) 545-3922
Fax: (704) 545-8345