What your pole package contains:
1 Xtreme Pole (18, 22, 25, 35 or 47)
1 Gooseneck
1 Hose Pack & Connector
1 Brush of choice
To assemble your pole ready for use:
Remove any packaging and carriage straps.
Slide the end of pole hose with red connector up though the base of the
Xtreme pole and push through until it appears out the top of the pole.
Connect the pole hose connector to the gooseneck stem (or gooseneck
hose) —
push firmly on.
Open the top clamp and slide the gooseneck fully into the top section. Close
the top clamp lever (adjust if needed) so that it firmly holds the gooseneck in
position.
Connect the pole hose connector to your hose reel and the pole is ready for
work.
